ZHCSO32C September   2000  – January 2022 INA126 , INA2126

PRODUCTION DATA  

  1. 1 特性
  2. 2 应用
  3. 3 说明
  4. 4 Revision History
  5. 5 Pin Configuration and Functions
  6. 6 Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information: INA126
    5. 6.5 Thermal Information: INA2126
    6. 6.6 Electrical Characteristics
    7. 6.7 Typical Characteristics
  7. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
    4. 7.4 Device Functional Modes
      1. 7.4.1 Single-Supply Operation
  8. 8 Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
        1. 8.2.2.1 Setting the Gain
        2. 8.2.2.2 Offset Trimming
        3. 8.2.2.3 Input Bias Current Return
        4. 8.2.2.4 Input Common-Mode Range
        5. 8.2.2.5 Input Protection
        6. 8.2.2.6 Channel Crosstalk—Dual Version
      3. 8.2.3 Application Curves
  9. 9 Power Supply Recommendations
    1. 9.1 Low-Voltage Operation
  10. 10Layout
    1. 10.1 Layout Guidelines
    2. 10.2 Layout Example
  11. 11Device and Documentation Support
    1. 11.1 Device Support
      1. 11.1.1 Development Support
        1. 11.1.1.1 PSpice® for TI
    2. 11.2 接收文档更新通知
    3. 11.3 支持资源
    4. 11.4 Trademarks
    5. 11.5 Electrostatic Discharge Caution
    6. 11.6 术语表
  12. 12Mechanical, Packaging, and Orderable Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

5 Pin Configuration and Functions

GUID-20C4CCB9-ACCF-41E7-9B91-C4C6A71B527C-low.gif Figure 5-1 INA126: P (8-Pin PDIP), D (8-Pin SOIC), and DGK (8-Pin VSSOP) Packages, Top View
Table 5-1 Pin Functions: INA126
PIN I/O DESCRIPTION
NO. NAME
1, 8 RG — Gain setting pin. For gains greater than 5 place a gain resistor between pin 1 and pin 8.
2 V–IN I Negative input
3 V+IN I Positive input
4 V– — Negative supply
5 Ref I Reference input. This pin must be driven by a low impedance or connected to ground.
6 VO O Output
7 V+ — Positive supply
GUID-D926D5D7-3EEF-41A6-8CF2-D58F6E7F80AF-low.gif Figure 5-2 INA2126: N (16-Pin PDIP), D (16-Pin SOIC), and DBQ (16-Pin SSOP) Packages, Top View
Table 5-2 Pin Functions: INA2126
PIN I/O DESCRIPTION
NO. NAME
1 V–INA I Negative input for amplifier A
2 V+INA I Positive input for amplifier A
3, 4 RGA — Gain setting pin for amplifier A. For gains greater than 5 place a gain resistor between pin 3 and pin 4.
5 RefA I Reference input for amplifier A. This pin must be driven by a low impedance or connected to ground.
6 VOA O Output of amplifier A
7 SenseA I Feedback for amplifier A. Connect to VOA, amplifier A output.
8 V– — Negative supply
9 V+ — Positive supply
10 SenseB I Feedback for amplifier B. Connect to VOB, amplifier B output.
11 VOB O Output of amplifier B
12 RefB I Reference input for amplifier B. This pin must be driven by a low impedance or connected to ground.
13, 14 RGB — Gain setting pin for amplifier B. For gains greater than 5 place a gain resistor between pin 13 and pin 14.
15 V+INB I Positive input for amplifier B
16 V–INB I Negative input for amplifier B
千亿体育app官网登录(中国)官方网站IOS/安卓通用版/手机APP | 米乐app下载官网（中国）|ios|Android/通用版APP最新版 | 米乐|米乐·M6（中国大陆）官方网站 | 千亿体育登陆地址 | 华体会体育（中国）HTH·官方网站 | 千赢qy国际_全站最新版千赢qy国际V6.2.14安卓/IOS下载 | 18新利网v1.2.5|中国官方网站 | bob电竞真人（中国官网）安卓/ios苹果/电脑版【1.97.95版下载】 | 千亿体育app官方下载(中国)官方网站IOS/安卓/手机APP下载安装 |