米6体育平台手机版

ZHCSE07B July 2015 – September 2024 INA226-Q1

PRODUCTION DATA

封装选项

机械数据 (封装 | 引脚)

DGS|10
- MPDS035C

散热焊盘机械数据 (封装 | 引脚)

订购信息

5.5 Electrical Characteristics

T_A = 25°C, V_VS = 3.3 V, V_IN+ = 12 V, V_SENSE = (V_IN+ – V_IN–) = 0 mV and V_VBUS = 12 V, unless otherwise noted

PARAMETER		TEST CONDITIONS	MIN	TYP	MAX	UNIT
INPUT
	Shunt voltage input range		–81.9175		81.92	mV
	Bus voltage input range⁽¹⁾		0		36	V
CMRR	Common-mode rejection	0 V ≤ V_IN+ ≤ 36 V	126	140		dB
V_OS	Shunt offset voltage, RTI⁽²⁾			±2.5	±10	μV
	Shunt offset voltage, RTI⁽²⁾ vs temperature	–40°C ≤ T_A ≤ 125°C		0.02	0.1	μV/°C
PSRR	Shunt offset voltage, RTI⁽²⁾ vs Power supply	2.7 V ≤ VS ≤ 5.5 V		±2.5		μV/V
V_OS	Bus offset voltage, RTI⁽²⁾			±1.25	±7.5	mV
	Bus offset voltage, RTI⁽²⁾ vs temperature	–40°C ≤ T_A ≤ 125°C		10	40	μV/°C
PSRR	Bus offset voltage, RTI⁽²⁾ vs power supply			±0.5		mV/V
I_B	Input bias current (I_IN+, I_IN– pins)			0.1		nA
	VBUS input impedance			830		kΩ
	Input leakage ⁽³⁾	(IN+ pin) + (IN– pin), Power-down mode		0.1	0.5	μA
DC ACCURACY
	ADC native resolution			16		Bits
	1 LSB step size	Shunt voltage		2.5		μV
	1 LSB step size	Bus voltage		1.25		mV
	Shunt voltage gain error			0.02%	0.1%
	Shunt voltage gain error vs temperature	–40°C ≤ T_A ≤ 125°C		10	50	ppm/°C
	Bus voltage gain error			0.02%	0.1%
	Bus voltage gain error vs temperature	–40°C ≤ T_A ≤ 125°C		10	50	ppm/°C
	Differential nonlinearity			±0.1		LSB
t_CT	ADC conversion time	CT bit = 000		140	154	μs
		CT bit = 001		204	224
		CT bit = 010		332	365
		CT bit = 011		588	646
		CT bit = 100		1.1	1.21	ms
		CT bit = 101		2.116	2.328
		CT bit = 110		4.156	4.572
		CT bit = 111		8.244	9.068
SMBus
	SMBus timeout⁽⁴⁾			28	35	ms
DIGITAL INPUT/OUTPUT
	Input capacitance			3		pF
	Leakage input current	0 V ≤ V_SCL ≤ V_VS , 0 V ≤ V_SDA ≤ V_VS, 0 V ≤ V_Alert ≤ V_VS , 0 V ≤ V_A0 ≤ V_VS , 0 V ≤ V_A1 ≤ V_VS		0.1	1	μA
V_IH	High-level input voltage		0.7×V_VS		6	V
V_IL	Low-level input voltage		–0.5		0.3×V_VS	V
V_OL	Low-level output voltage, SDA, Alert	I_OL = 3 mA	0		0.4	V
	Hysteresis			500		mV
POWER SUPPLY
	Operating supply range		2.7		5.5	V
I_Q	Quiescent current			330	420	μA
	Quiescent current, power-down (shutdown) mode			0.5	2	μA
V_POR	Power-on reset threshold			2		V

(1) While the input range is 36 V, the full-scale range of the ADC scaling is 40.96 V. See the Section 6.3.1. Do not apply more than 36 V.

(2) RTI = Referred-to-input.

(3) Input leakage is positive (current flowing into the pin) for the conditions shown at the top of this table. Negative leakage currents can occur under different input conditions.

(4) SMBus timeout in the device resets the interface any time SCL is low for more than 28 ms.