米6体育平台手机版

ZHCSIX1B October 2018 – December 2018 INA901-SP

PRODUCTION DATA.

封装选项

机械数据 (封装 | 引脚)

HKX|8
- MCQF026B

散热焊盘机械数据 (封装 | 引脚)

订购信息

6.5 Electrical Characteristics

V_S = 2.7 V and 16 V, V_CM = –15 V, 12 V and 80 V, V_SENSE = 100 mV, and PRE OUT connected to BUF IN, unless otherwise noted. T_A is as shown in SUBGROUP column.

PARAMETER		TEST CONDITIONS	SUBGROUP⁽⁴⁾	MIN	TYP	MAX	UNIT
INPUT
V_SENSE	Full-scale input voltage	V_SENSE = (V_IN+) – (V_IN–)	[1, 2, 3]		0.15	(V_S – 0.2) / Gain	V
V_CM	Common-mode input range		[1, 2, 3]	–16		80	V
CMRR	Common-mode rejection ratio	V_IN+ = –15 V to 80 V	[1]	80	120		dB
CMRR	Common-mode rejection ratio	V_IN+ = –15 V to 80 V	[2, 3]	70	120		dB
V_OS	Offset voltage, RTI		[1]		±0.5	±2.5	mV
V_OS	Offset voltage, RTI		[2, 3]			±3.5	mV
dV_OS/dT					2.5		μV/°C
PSR	V_OS vs power-supply		[1, 2, 3]		5	250	μV/V
I_B	Input bias current, V_IN– pin		[1]		±8	±16	μA
I_B	Input bias current, V_IN– pin		[2, 3]			±19	μA
	PRE OUT output impedance				96		kΩ
	Buffer input bias current				–50		nA
	Buffer input bias current temperature coefficient				±0.03		nA/°C
OUTPUT (V_SENSE ≥ 20 mV)⁽²⁾
G	Gain				20		V/V
G_BUF	Output buffer gain				2		V/V
	Total gain error	V_SENSE = 20 mV to 100 mV	[4, 5, 6]		±0.2%	±1.5%
	Total gain error vs temperature	T_A = –55°C to 125°C			50		ppm/°C
	Total output error⁽³⁾		[4]		±0.75%	±2%
	Total output error⁽³⁾		[5, 6]			±3%
	Nonlinearity error	V_SENSE = 20 mV to 100 mV			±0.002%
R_O	Output impedance, pin 5				1.5		Ω
	Maximum capacitive load	No sustained oscillation			10		nF
VOLTAGE OUTPUT (R_L = 10 kΩ to GND)
	Swing to V+ power-supply rail		[1, 2, 3]		(V+) – 0.05	(V+) – 0.2	V
	Swing to GND		[1, 2, 3]		V_GND + 0.003	V_GND + 0.05	V
FREQUENCY RESPONSE
BW	Bandwidth	C_LOAD = 5 pF			130		kHz
	Phase margin	C_LOAD < 10 nF			40		°
SR	Slew rate				1		V/μs
t_S	Settling time (1%)	V_SENSE = 10 mV to 100 mV_PP, C_LOAD = 5 pF			2		μs
NOISE, RTI⁽¹⁾
e_n	Voltage noise density				40		nV/√Hz
POWER SUPPLY
V_S	Operating range		[1, 2, 3]	2.7		16	V
I_Q	Quiescent current	V_OUT = 2 V	[1]		700	900	μA
		V_OUT = 2 V	[2, 3]		700	1200
		V_SENSE = 0 mV	[1]		350	500
		V_SENSE = 0 mV	[2, 3]		350	650

(1) RTI means Referred-to-Input.

(2) For output behavior when V_SENSE < 20 mV, see the Accuracy Variations as a Result of VSENSE and Common-Mode Voltage section.

(3) Total output error includes effects of gain error and V_OS.

(4) For subgroup definitions, please see Quality Conformance Inspection table.