米6体育平台手机版

ZHCSIV2C September 2018 – September 2019 ISO1500

PRODUCTION DATA.

Typical specs are at V_CC1=3.3V, V_CC2=5V, T_A=27℃ (Min/Max are over recommended operating conditions unless otherwise noted)

PARAMETER		TEST CONDITIONS	MIN	TYP	MAX	UNIT
I_i1	Bus input current	V_DE = 0 V, V_CC2 = 0 V or V_CC2 = 5.5 V, One bus input at –7 V or 12 V, other input at 0 V	–100		100	µA
V_TH+	Positive-going input threshold voltage	–7 V ≤ Common mode voltage on bus terminals ≤ 12 V	See ⁽¹⁾	–100	–50	mV
V_TH–	Negative-going input threshold voltage	–7 V ≤ Common mode voltage on bus terminals ≤ 12 V	–200	–145	See ⁽¹⁾	mV
V_hys	Input hysteresis (V_TH+ – V_TH–)	–7 V ≤ Common mode voltage on bus terminals ≤ 12 V	20	45		mV
V_OH	Output high voltage on the R pin	V_CC1=5V+/-10%, I_OH = –4 mA, V_ID = 200 mV	V_CC1– 0.4			V
		V_CC1=3.3V+/-10%, I_OH = –2 mA, V_ID = 200 mV	V_CC1 – 0.3			V
		V_CC1=2.5V+/-10%, 1.8V+/-5%, I_OH = –1 mA, V_ID = 200 mV	V_CC1 – 0.2			V
V_OL	Output low voltage on the R pin	V_CC1=5V+/-10%, I_OL = 4 mA, V_ID = –200 mV			0.4	V
		V_CC1=3.3V+/-10%, I_OL = 2 mA, V_ID = –200 mV			0.3	V
		V_CC1=2.5V+/-10%, 1.8V+/-5%, I_OL = 1 mA, V_ID = –200 mV			0.2	V
I_OZ	Output high-impedance current on the R pin	V_R = 0 V or V_R = V_CC1, V_RE = V_CC1	–1		1	µA
I_i	Input current on the RE pin	V_RE = 0 V or V_RE = V_CC1	–10		10	µA
CMTI	Common-mode transient immunity	V_ID = 1.5 V or -1.5 V, V_CM= 1200 V , See Figure 22	85	100		kV/µs

(1) Under any specific conditions, V_TH+ is ensured to be at least V_hys higher than V_TH–.