SLLSFC3A March 2020 – December 2021 ISO1640-Q1
PRODUCTION DATA
- 1 Features
- 2 Applications
- 3 Description
- 4 Revision History
- 5 Pin Configuration and Functions
-
6 Specifications
- 6.1 Absolute Maximum Ratings
- 6.2 ESD Ratings
- 6.3 Recommended Operating Conditions
- 6.4 Thermal Information
- 6.5 Power Ratings
- Insulation Specifications
- 6.6 Safety-Related Certifications
- 6.7 Safety Limiting Values
- 6.8 Electrical Characteristics
- 6.9 Supply Current Characteristics
- 6.10 Timing Requirements
- 6.11 Switching Characteristics
- 6.12 Insulation Characteristics Curves
- 6.13 Typical Characteristics
- 7 Parameter Measurement Information
- 8 Detailed Description
- 9 Application and Implementation
- 10Power Supply Recommendations
- 11Layout
- 12Device and Documentation Support
- 13Mechanical, Packaging, and Orderable Information
7 Parameter Measurement Information
Figure 7-1 Test Diagram
Figure 7-2 tLoop1 Setup and Timing Diagram
Figure 7-3 Common-Mode Transient Immunity Test Circuit
The input pulse is
supplied by a generator having the following characteristics: PRR ≤ 50
kHz, 50% duty cycle, tr ≤ 3 ns, tf ≤ 3ns,
ZO = 50 Ω. At the input, 50 Ω resistor is required to
terminate Input Generator signal. It is not needed in actual
application.
CL = 15 pF and
includes instrumentation and fixture capacitance within ±20%.
Figure 7-4 GPIO Channel Switching Characteristics Test Circuit and Voltage
Waveforms
CL = 15 pF and
includes instrumentation and fixture capacitance within ±20%.
Power Supply Ramp Rate =
10 mV/ns
Figure 7-5 GPIO Channel Default Output Delay Time Test Circuit and Voltage
Waveforms