4 Revision History
Changes from Revision B (January 2017) to Revision C (May 2023)
- Added Additional manufacturing certification pending in the
Safety-Related Certifications tableGo
Changes from Revision A (September 2015) to Revision B (January 2017)
- 将标题从有源安全特性 更改为有源保护特性
Go
- 将“特性”从“浪涌抗扰度为 10000 VPK（根据 IEC 61000-4-5）”更改为可耐受的浪涌隔离电压高达 10000 VPK
Go
- Moved Insulation Specifications to the Specifications sectionGo
- Changed RIO Test conditions From: TS To: TS = 150°C in Insulation Specifications
Go
- Moved Safety-Related Certifications to the Specifications sectionGo
- Moved Safety Limiting Values to the Specifications sectionGo
- Moved Insulation Characteristics Curves to the Specifications
Go
- Added text ", but connecting CLAMP output of the gate driver to the IGBT gate is also not an issue." to Supply and Active Miller Clamp
Go
- Deleted ground symbol on pin 11 of the Global Shutdown With Inverting Input Configuration figureGo
- Deleted ground symbol on pin 11 on the inverting input of the Auto Reset for Noninverting and Inverting Input Configuration figureGo
Changes from Revision * (August 2015) to Revision A (September 2015)
- 将首页的“米6体育平台手机版_好二三四预发布”更改为完整数据表Go
- 将特性 部分的“50kV/μs 最小共模瞬态抗扰度和 100kV/μs 典型共模瞬态抗扰度...”移至列表顶部Go
- 将所有认证的状态更改为完成Go
- 更改了功能方框图，在引脚 OUTL 上添加了 STOGo
- Changed RIO Test conditions From: 100°C ≤ TA ≤ max To: 100°C ≤ TA ≤ 125°C in Insulation Specifications
Go
- Changed the Safety-Related Certifications tableGo