米6体育平台手机版

ZHCSDT0C june 2015 – may 2023 ISO5851

PRODUCTION DATA

封装选项

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)

DW|16

散热焊盘机械数据 (封装 | 引脚)

订购信息

7.10 Switching Characteristics

Over recommended operating conditions unless otherwise noted. All typical values are at T_A = 25°C, V_CC1 = 5 V, V_CC2 – GND2 = 15 V, GND2 – V_EE2 = 8 V

PARAMETER		TEST CONDITIONS	MIN	TYP	MAX	UNIT
t_r	Output signal rise time	C_LOAD = 1 nF, see Figure 8-1, Figure 8-2, and Figure 8-3	12	20	35	ns
t_f	Output signal fall time		12	20	37	ns
t_PLH, t_PHL	Propagation Delay			76	110	ns
t_sk-p	Pulse Skew \|t_PHL – t_PLH\|				20	ns
t_sk-pp	Part-to-part skew				30⁽¹⁾	ns
t_GF	Glitch filter on IN+, IN–, RST		20	30	40	ns
t_{DESAT (10%)}	DESAT sense to 10% OUT delay		300	415	500	ns
t_{DESAT (GF)}	DESAT glitch filter delay			330		ns
t_{DESAT ( FLT)}	DESAT sense to FLT-low delay	see Figure 8-3		2000	2420	ns
t_LEB	Leading edge blanking time	see Figure 8-1 and Figure 8-2	330	400	500	ns
t_GF(RSTFLT)	Glitch filter on RST for resetting FLT		300		800	ns
C_I	Input capacitance⁽²⁾	V_I = V_CC1 /2 + 0.4 x sin (2πft), f = 1 MHz, V_CC1 = 5 V		2		pF
CMTI	Common-mode transient immunity	V_CM = 1500 V, see Figure 8-4	100	120		kV/μs

(1) Measured at same supply voltage and temperature condition

(2) Measured from input pin to ground.