4 Revision History
Changes from Revision B (January 2017) to Revision C (May 2023)
- Added Additional manufacturing certification pending to
Safety-Related Certifications tableGo
Changes from Revision A (September 2015) to Revision B (January 2017)
- 将数据表标题从有源安全特性 更改为有源保护特性
Go
- 将“特性”从“浪涌抗扰度为 12800VPK（根据 IEC 61000-4-5）”更改为“可承受的隔离浪涌电压 12800VPK”Go
- Changed the minimum external tracking (creepage) parameter to the external creepage parameterGo
- Changed the input-to-output test voltage parameter to the apparent charge parameterGo
- Added the climatic category to the Insulation Specifications tableGo
- Changed the CSA status from planned to certifiedGo
- Added text ", but connecting CLAMP output of the gate driver to the IGBT gate is also not an issue." to Supply and Active Miller Clamp
Go
- Changed the second paragraph of the Typical Applications
Go
- Added text "and
RST input signal" to the Design Requirements
Go
Changes from Revision * (July 2015) to Revision A (September 2015)
- 将特性 部分的“100kV/μs 最小共模瞬态抗扰度...”移至列表顶部Go
- 将首页的“米6体育平台手机版_好二三四预发布”更改为完整数据表Go
- 将说明 中的文本“3V 至 5.5V 的单电源”更改为“2.25V 至 5.5V 的单电源”Go
- 将说明 中的文本“IGBT 处于过载状态”更改为“IGBT 处于过流状态”Go
- 将说明 中的文本“并在最短 2μs 的时间跨度内降低 OUTL 上的电压”更改为“并在 2μs 的时间跨度内将 OUTL 拉至低电平”Go
- 更改了功能方框图，在引脚 OUTL 上添加了 STOGo
- 更改了说明 的第 3 段Go
- Changed the minimum air gap (clearance) parameter to the external clearance parameterGo