ZHCSUB1B August 2023 – April 2024 ISO6520 , ISO6521
PRODUCTION DATA
- 1
- 1 特性
- 2 应用
- 3 说明
- 4 Pin Configuration and Functions
-
5 Specifications
- 5.1 Absolute Maximum Ratings
- 5.2 ESD Ratings
- 5.3 Recommended Operating Conditions
- 5.4 Thermal Information
- 5.5 Package Characteristics
- 5.6 Electrical Characteristics—5-V Supply
- 5.7 Supply Current Characteristics—5-V Supply
- 5.8 Electrical Characteristics—3.3-V Supply
- 5.9 Supply Current Characteristics—3.3-V Supply
- 5.10 Electrical Characteristics—2.5-V Supply
- 5.11 Supply Current Characteristics—2.5-V Supply
- 5.12 Electrical Characteristics—1.8-V Supply
- 5.13 Supply Current Characteristics—1.8-V Supply
- 5.14 Switching Characteristics—5-V Supply
- 5.15 Switching Characteristics—3.3-V Supply
- 5.16 Switching Characteristics—2.5-V Supply
- 5.17 Switching Characteristics—1.8-V Supply
- 5.18 Typical Characteristics
- 6 Parameter Measurement Information
- 7 Detailed Description
- 8 Application and Implementation
- 9 Power Supply Recommendations
- 10Layout
- 11Device and Documentation Support
- 12Revision History
- 13Mechanical, Packaging, and Orderable Information
6 Parameter Measurement Information
A. The input pulse is supplied by a generator having
the following characteristics: PRR ≤ 50 kHz, 50% duty cycle, tr ≤ 3
ns, tf ≤ 3 ns, ZO = 50 Ω. At the input, 50 Ω resistor is
required to terminate Input Generator signal. The 50 Ω resistor is not needed in
the actual application.
B. CL = 15 pF and
includes instrumentation and fixture capacitance within ±20%.
Figure 6-1 Switching
Characteristics Test Circuit and Voltage Waveforms
A. CL =
15 pF and includes instrumentation and fixture capacitance
within ±20%.
B. Power Supply Ramp
Rate = 10 mV/ns
Figure 6-2 Default Output Delay Time Test Circuit
and Voltage Waveforms
A. CL = 15 pF and
includes instrumentation and fixture capacitance within ±20%.
Figure 6-3 Common-Mode Transient Immunity Test Circuit