米6体育平台手机版

ZHCSMP2B December 2019 – February 2023 ISO6731

PRODUCTION DATA

封装选项

机械数据 (封装 | 引脚)

DW|16
- MSOI003I

散热焊盘机械数据 (封装 | 引脚)

DW|16
- QFND505A

订购信息

6.8 Safety Limiting Values

Safety limiting#A_ISO104X_SAFETY_LIMITING_V1_SAFETY_LIMITING_VALUES_FOOTER1_SF1_SF1 intends to minimize potential damage to the isolation barrier upon failure of input or output circuitry.

PARAMETER		TEST CONDITIONS	MAX	UNIT
DW-16 PACKAGE
I_S	Safety input, output, or supply current	R_θJA =73°C/W, V_I = 5.5 V, T_J = 150°C, T_A = 25°C See GUID-20D0BC3B-CEA1-4BC1-A4CE-D8F0C552352B.html#SLLSEP41999	311.4	mA
		R_θJA = 73°C/W, V_I = 3.6 V, T_J = 150°C, T_A = 25°C See GUID-20D0BC3B-CEA1-4BC1-A4CE-D8F0C552352B.html#SLLSEP41999	475.7	mA
		R_θJA = 73°C/W, V_I = 2.75 V, T_J = 150°C, T_A = 25°C See GUID-20D0BC3B-CEA1-4BC1-A4CE-D8F0C552352B.html#SLLSEP41999	622	mA
		R_θJA = 73°C/W, V_I = 1.89 V, T_J = 150°C, T_A = 25°C See GUID-20D0BC3B-CEA1-4BC1-A4CE-D8F0C552352B.html#SLLSEP41999	905.1	mA
P_S	Safety input, output, or total power	R_θJA = 73°C/W, T_J = 150°C, T_A = 25°C See GUID-20D0BC3B-CEA1-4BC1-A4CE-D8F0C552352B.html#SLLSEP41998	1712.4	mW
T_S	Maximum safety temperature		150	°C

(1) The maximum safety temperature, T_S, has the same value as the maximum junction temperature, T_J, specified for the device. The I_S and P_S parameters represent the safety current and safety power respectively. The maximum limits of I_S and P_S should not be exceeded. These limits vary with the ambient temperature, T_A.

The junction-to-air thermal resistance, R_θJA, in the table is that of a device installed on a high-K test board for leaded surface-mount packages. Use these equations to calculate the value for each parameter:
T_J = T_A + R_θJA × P, where P is the power dissipated in the device.
T_J(max)= T_S = T_A + R_θJA × P_S, where T_J(max) is the maximum allowed junction temperature.
P_S = I_S × V_I, where V_I is the maximum input voltage.