ZHCSK04C July 2019 – May 2024 ISO7021
PRODUCTION DATA
- 1
- 1 特性
- 2 应用
- 3 说明
- 4 Device Comparison Table
- 5 Pin Configuration and Functions
-
6 Specifications
- 6.1 Absolute Maximum Ratings
- 6.2 ESD Ratings
- 6.3 Recommended Operating Conditions
- 6.4 Thermal Information
- 6.5 Power Ratings
- 6.6 Insulation Specifications
- 6.7 Safety-Related Certifications
- 6.8 Safety Limiting Values
- 6.9 Electrical Characteristics 5V Supply
- 6.10 Supply Current Characteristics 5V Supply
- 6.11 Electrical Characteristics 3.3V Supply
- 6.12 Supply Current Characteristics 3.3V Supply
- 6.13 Electrical Characteristics 2.5V Supply
- 6.14 Supply Current Characteristics 2.5V Supply
- 6.15 Electrical Characteristics 1.8V Supply
- 6.16 Supply Current Characteristics 1.8V Supply
- 6.17 Switching Characteristics
- 7 Parameter Measurement Information
- 8 Detailed Description
- 9 Application and Implementation
- 10Power Supply Recommendations
- 11Layout
- 12Device and Documentation Support
- 13Revision History
- 14Mechanical, Packaging, and Orderable Information
7 Parameter Measurement Information
A. The input pulse is supplied by a
generator having the following characteristics: PRR ≤ 50kHz, 50% duty cycle,
tr ≤ 3ns, tf ≤ 3ns, ZO = 50Ω. At the input,
a 50Ω resistor is required to terminate Input Generator signal. The 50Ω resistor
is not needed in the actual application.
B. CL = 15pF and includes
instrumentation and fixture capacitance within ±20%.
Figure 7-1 Switching
Characteristics Test Circuit and Voltage Waveforms
A. CL = 15pF and includes
instrumentation and fixture capacitance within ±20%.
B. Power Supply Ramp Rate =
10mV/ns
Figure 7-2 Default
Output Delay Time Test Circuit and Voltage Waveforms
A. CL = 15pF and includes
instrumentation and fixture capacitance within ±20%.
Figure 7-3 Common-Mode Transient Immunity Test Circuit