米6体育平台手机版

ZHCSIQ8P July 2006 – August 2018 ISO7220A , ISO7220B , ISO7220C , ISO7220M , ISO7221A , ISO7221B , ISO7221C , ISO7221M

PRODUCTION DATA.

封装选项

机械数据 (封装 | 引脚)

D|8
- MSOI002K

散热焊盘机械数据 (封装 | 引脚)

订购信息

6.14 Switching Characteristics—5-V V_CC1 and V_CC2 Supplies

V_CC1 and V_CC2 at 5 V ± 10% (over recommended operating conditions unless otherwise noted.)

PARAMETER		TEST CONDITIONS	MIN	TYP	MAX	UNIT
t_PLH, t_PHL	Propagation delay	ISO722xA, see Figure 14	280	405	600	ns
PWD	Pulse-width distortion \|t_PHL – t_PLH\|⁽¹⁾	ISO722xA, see Figure 14		1	18	ns
t_PLH, t_PHL	Propagation delay	ISO722xB, see Figure 14	42	55	70	ns
PWD	Pulse-width distortion \|t_PHL – t_PLH\|⁽¹⁾	ISO722xB, see Figure 14		1	3	ns
t_PLH, t_PHL	Propagation delay	ISO722xC, see Figure 14	22	32	42	ns
PWD	Pulse-width distortion \|t_PHL – t_PLH\|⁽¹⁾	ISO722xC, see Figure 14		1	2	ns
t_PLH, t_PHL	Propagation delay	ISO722xM, see Figure 14	6	10	16	ns
PWD	Pulse-width distortion \|t_PHL – t_PLH\|⁽¹⁾	ISO722xM, see Figure 14		0.5	1	ns
t_sk(pp)	Part-to-part skew ⁽²⁾	ISO722xA			180	ns
		ISO722xB			17
		ISO722xC			10
		ISO722xM			3
t_sk(o)	Channel-to-channel output skew ⁽³⁾	ISO7220A		3	15	ns
		ISO7220B		0.6	3
		ISO7220C, ISO7220M		0.2	1
t_r	Output signal rise time	See Figure 14		1		ns
t_f	Output signal fall time	See Figure 14		1		ns
t_fs	Failsafe output delay time from input power loss	See Figure 15		3		μs
t_jit(pp)	Peak-to-peak eye-pattern jitter	ISO722xM, 150 Mbps PRBS NRZ data, 5-bit max same polarity input, both channels, See Figure 17, Figure 13		1		ns
t_jit(pp)	Peak-to-peak eye-pattern jitter	ISO722xM, 150 Mbps unrestricted bit run length data input, both channels, See Figure 17		2		ns

(1) Also referred to as pulse skew.

(2) t_sk(pp) is the magnitude of the difference in propagation delay times between any specified pins of two devices when both devices operate with the same supply voltages, at the same temperature, and have identical packages and test circuits.

(3) t_sk(o) is the skew between specified outputs of a single device with all driving inputs connected together and the outputs switching in the same direction while driving identical specified loads.

封装选项

机械数据 (封装 | 引脚)

散热焊盘机械数据 (封装 | 引脚)

订购信息

6.14 Switching Characteristics—5-V VCC1 and VCC2 Supplies

6.14 Switching Characteristics—5-V V_CC1 and V_CC2 Supplies