ZHCSX85L September   2007  – October 2024 ISO7230C , ISO7231C , ISO7231M

PRODUCTION DATA  

  1.   1
  2. 1 特性
  3. 2 应用
  4. 3 说明
  5. 4 Device Comparison Table
  6. 5 Pin Configuration and Functions
  7. 6 Specifications
    1. 6.1  Absolute Maximum Ratings
    2. 6.2  ESD Ratings
    3. 6.3  Thermal Information
    4. 6.4  Recommended Operating Conditions
    5. 6.5  Power Ratings
    6. 6.6  Insulation Specifications
    7. 6.7  Safety-Related Certifications
    8. 6.8  Safety Limiting Values
    9. 6.9  Electrical Characteristics: VCC1 and VCC2 at 3.3 V
    10. 6.10 Electrical Characteristics: VCC1 and VCC2 at 5-V
    11. 6.11 Electrical Characteristics: VCC1 at 3.3-V, VCC2 at 5-V
    12. 6.12 Electrical Characteristics: VCC1 at 5-V, VCC2 at 3.3-V
    13. 6.13 Switching Characteristics: VCC1 and VCC2 at 3.3-V
    14. 6.14 Switching Characteristics: VCC1 and VCC2 at 5-V
    15. 6.15 Switching Characteristics: VCC1 at 3.3-V and VCC2 at 5-V
    16. 6.16 Switching Characteristics: VCC1 at 5-V, VCC2 at 3.3-V
    17. 6.17 Typical Characteristics
  8. 7 Parameter Measurement Information
  9. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
    4. 8.4 Device Functional Modes
      1. 8.4.1 Device I/O Schematics
  10. 9 Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
      3. 9.2.3 Application Performance Plots
        1. 9.2.3.1 Insulation Characteristics Curves
    3. 9.3 Power Supply Recommendations
    4. 9.4 Layout
      1. 9.4.1 Layout Guidelines
        1. 9.4.1.1 PCB Material
      2. 9.4.2 Layout Example
  11. 10Device and Documentation Support
    1. 10.1 Documentation Support
      1. 10.1.1 Related Documentation
    2. 10.2 接收文档更新通知
    3. 10.3 支持资源
    4. 10.4 Trademarks
    5. 10.5 静电放电警告
    6. 10.6 术语表
  12. 11Revision History
  13. 12Mechanical, Packaging, and Orderable Information

封装选项

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)
  • DW|16
散热焊盘机械数据 (封装 | 引脚)
订购信息

6.11 Electrical Characteristics: VCC1 at 3.3-V, VCC2 at 5-V

over recommended operating conditions (unless otherwise noted)(1)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
SUPPLY CURRENT
ICC1 ISO7230C/M Quiescent VI = VCCI or 0 V, all channels, no load, EN at 3 V 0.5 1.2 mA
25 Mbps 3 5
ISO7231C/M Quiescent VI = VCCI or 0 V, all channels, no load, EN1 at 3 V,
EN2 at 3 V		 4.5 7 mA
25 Mbps 6.5 11
ICC2 ISO7230C/M Quiescent VI = VCCI or 0 V, all channels, no load, EN at 3 V 15 22 mA
25 Mbps 17 24
ISO7231C/M Quiescent VI = VCCI or 0 V, all channels, no load, EN1 at 3 V,
EN2 at 3 V		 13 20 mA
25 Mbps 17.5 27
ELECTRICAL CHARACTERISTICS
IOFF Sleep mode output current ENx at 0 V, Single channel 0 μA
VOH High-level output voltage IOH = –4 mA, See Figure 7-1 ISO7230 VCCO – 0.4 V
ISO7231
(5-V side)		 VCCO – 0.8
IOH = –20 μA, See Figure 7-1 VCCO – 0.1
VOL Low-level output voltage IOL = 4 mA, See Figure 7-1 0.4 V
IOL = 20 μA, See Figure 7-1 0.1
VI(HYS) Input voltage hysteresis 150 mV
IIH High-level input current INx at VCCI 10 μA
IIL Low-level input current INx at 0 V –10
CI Input capacitance to ground IN at VCC, VI = 0.4 sin (2πft), f=2MHz 2 pF
CMTI Common-mode transient immunity VI = VCCI or 0 V, See Figure 7-4 25 50 kV/μs
(1) For the 5-V operation, VCC1 or VCC2 is specified from 4.5 V to 5.5 V.
For the 3.3-V operation, VCC1 or VCC2 is specified from 3.15 V to 3.6 V.
千亿体育app官网登录(中国)官方网站IOS/安卓通用版/手机APP | 米乐app下载官网（中国）|ios|Android/通用版APP最新版 | 米乐|米乐·M6（中国大陆）官方网站 | 千亿体育登陆地址 | 华体会体育（中国）HTH·官方网站 | 千赢qy国际_全站最新版千赢qy国际V6.2.14安卓/IOS下载 | 18新利网v1.2.5|中国官方网站 | bob电竞真人（中国官网）安卓/ios苹果/电脑版【1.97.95版下载】 | 千亿体育app官方下载(中国)官方网站IOS/安卓/手机APP下载安装 |