米6体育平台手机版

ZHCSFH4J September 2016 – October 2024 ISO7730 , ISO7731

PRODUCTION DATA

5.9 Electrical Characteristics—5-V Supply

V_CC1= V_CC2 = 5 V ±10% (over recommended operating conditions unless otherwise noted)

PARAMETER		TEST CONDITIONS	MIN	TYP	MAX	UNIT
V_OH	High-level output voltage	I_OH= -4 mA; See Figure 6-1	V_CCO - 0.4 ⁽¹⁾	4.8		V
V_OL	Low-level output voltage	I_OL = 4 mA; See Figure 6-1		0.2	0.4	V
V_IT+(IN)	Rising input switching threshold			0.6 x V_CCI	0.7 x V_CCI	V
V_IT-(IN)	Falling input switching threshold		0.3 x V_CCI	0.4 x V_CCI		V
V_I(HYS)	Input threshold voltage hysteresis		0.1 x V_CCI	0.2 x V_CCI		V
I_IH	High-level input current	V_IH = V_CCI ⁽¹⁾ at INx			10	µA
I_IL	Low-level input current	V_IL = 0 V at INx	-10			µA
I_IH	High-level input current	V_IH = V_CCI ⁽¹⁾ at ENx			28	μA
I_IL	Low-level input current	V_IL = 0 V at ENx	-28			μA
CMTI	Common mode transient immunity	V_I= V_CCI or 0 V, V_CM= 1200 V; See Figure 6-4	85	100		kV/μs
C_I	Input capacitance ⁽²⁾	V_I = V_CC/ 2 + 0.4×sin(2πft), f = 1 MHz, V_CC = 5 V		2		pF

(1) V_CCI = Input-side V_CC; V_CCO = Output-side V_CC

(2) Measured from input pin to same side ground.