米6体育平台手机版

ZHCSFH4J September 2016 – October 2024 ISO7730 , ISO7731

PRODUCTION DATA

封装选项

机械数据 (封装 | 引脚)

DW|16
- MSOI003I
DBQ|16
- MSOI004H

散热焊盘机械数据 (封装 | 引脚)

DW|16
- QFND505A

订购信息

5.15 Switching Characteristics—5-V Supply

V_CC1= V_CC2 = 5 V ±10% (over recommended operating conditions unless otherwise noted)

PARAMETER		TEST CONDITIONS	MIN	TYP	MAX	UNIT
t_PLH, t_PHL	Propagation delay time	See Figure 6-1	6	11	17	ns
PWD	Pulse width distortion⁽¹⁾ \|t_PHL – t_PLH\|	See Figure 6-1		0.6	5.9	ns
t_sk(o)	Channel-to-channel output skew time⁽²⁾	Same-direction channels			4	ns
t_sk(pp)	Part-to-part skew time⁽³⁾				4.5	ns
t_r	Output signal rise time	See Figure 6-1		1.3	3.9	ns
t_f	Output signal fall time	See Figure 6-1		1.4	3.9	ns
t_PHZ	Disable propagation delay, high-to-high impedance output	See Figure 6-2		8	22	ns
t_PLZ	Disable propagation delay, low-to-high impedance output			8	20	ns
t_PZH	Enable propagation delay, high impedance-to-high output for ISO773x			7	20	ns
t_PZH	Enable propagation delay, high impedance-to-high output for ISO773x with F suffix			3	8.5	μs
t_PZL	Enable propagation delay, high impedance-to-low output for ISO773x			3	8.5	μs
t_PZL	Enable propagation delay, high impedance-to-low output for ISO773x with F suffix			7	20	ns
t_DO	Default output delay time from input power loss	Measured from the time VCC goes below 1.7V. See Figure 6-3		0.1	0.3	μs
t_ie	Time interval error	2¹⁶– 1 PRBS data at 100 Mbps		0.6		ns

(1) Also known as pulse skew.

(2) t_sk(o) is the skew between outputs of a single device with all driving inputs connected together and the outputs switching in the same direction while driving identical loads.

(3) t_sk(pp) is the magnitude of the difference in propagation delay times between any terminals of different devices switching in the same direction while operating at identical supply voltages, temperature, input signals and loads.