ZHCSDM9A December   2014  – March 2018 LDC1612 , LDC1614

PRODUCTION DATA.  

  1. 1 特性
  2. 2 应用
  3. 3 说明
    1.     Device Images
      1.      简化原理图
      2.      测量精度与目标距离间的关系
  4. 4 修订历史记录
  5. 5 Pin Configuration and Functions
    1.     Pin Functions
  6. 6 Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 Switching Characteristics - I2C
    7. 6.7 Typical Characteristics
  7. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Multi-Channel and Single Channel Operation
      2. 7.3.2 Adjustable Conversion Time
      3. 7.3.3 Sensor Startup and Glitch Configuration
      4. 7.3.4 Reference Clock
      5. 7.3.5 Sensor Current Drive Control
      6. 7.3.6 Device Status Monitoring
    4. 7.4 Device Functional Modes
      1. 7.4.1 Startup Mode
      2. 7.4.2 Sleep Mode (Configuration Mode)
      3. 7.4.3 Normal (Conversion) Mode
      4. 7.4.4 Shutdown Mode
        1. 7.4.4.1 Reset
    5. 7.5 Programming
      1. 7.5.1 I2C Interface Specifications
      2. 7.5.2 Pulses on I2C
      3. 7.5.3 Multi Register Data Readback
    6. 7.6 Register Maps
      1. 7.6.1  Register List
      2. 7.6.2  Address 0x00, DATA0_MSB
        1. Table 1. Address 0x00, DATA0_MSB Field Descriptions
      3. 7.6.3  Address 0x01, DATA0_LSB
        1. Table 2. Address 0x01 DATA0_LSB Field Descriptions
      4. 7.6.4  Address 0x02, DATA1_MSB
        1. Table 3. Address 0x02, DATA1_MSB Field Descriptions
      5. 7.6.5  Address 0x03, DATA1_LSB
        1. Table 4. Address 0x03, DATA1_LSB Field Descriptions
      6. 7.6.6  Address 0x04, DATA2_MSB (LDC1614 only)
        1. Table 5. Address 0x04, DATA2_MSB Field Descriptions
      7. 7.6.7  Address 0x05, DATA2_LSB (LDC1614 only)
        1. Table 6. Address 0x05 DATA2_LSB Field Descriptions
      8. 7.6.8  Address 0x06, DATA3_MSB (LDC1614 only)
        1. Table 7. Address 0x06, DATA3_MSB Field Descriptions
      9. 7.6.9  Address 0x07, DATA3_LSB (LDC1614 only)
        1. Table 8. Address 0x07 DATA3_LSB Field Descriptions
      10. 7.6.10 Address 0x08, RCOUNT0
        1. Table 9. Address 0x08, RCOUNT0 Field Descriptions
      11. 7.6.11 Address 0x09, RCOUNT1
        1. Table 10. Address 0x09, RCOUNT1 Field Descriptions
      12. 7.6.12 Address 0x0A, RCOUNT2 (LDC1614 only)
        1. Table 11. Address 0x0A, RCOUNT2 Field Descriptions
      13. 7.6.13 Address 0x0B, RCOUNT3 (LDC1614 only)
        1. Table 12. Address 0x0B, RCOUNT3 Field Descriptions
      14. 7.6.14 Address 0x0C, OFFSET0
        1. Table 13. OFFSET0 Field Descriptions
      15. 7.6.15 Address 0x0D, OFFSET1
        1. Table 14. Address 0x0D, OFFSET1 Field Descriptions
      16. 7.6.16 Address 0x0E, OFFSET2 (LDC1614 only)
        1. Table 15. Address 0x0E, OFFSET2 Field Descriptions
      17. 7.6.17 Address 0x0F, OFFSET3 (LDC1614 only)
        1. Table 16. Address 0x0F, OFFSET3 Field Descriptions
      18. 7.6.18 Address 0x10, SETTLECOUNT0
        1. Table 17. Address 0x10, SETTLECOUNT0 Field Descriptions
      19. 7.6.19 Address 0x11, SETTLECOUNT1
        1. Table 18. Address 0x11, SETTLECOUNT1 Field Descriptions
      20. 7.6.20 Address 0x12, SETTLECOUNT2 (LDC1614 only)
        1. Table 19. Address 0x12, SETTLECOUNT2 Field Descriptions
      21. 7.6.21 Address 0x13, SETTLECOUNT3 (LDC1614 only)
        1. Table 20. Address 0x13, SETTLECOUNT3 Field Descriptions
      22. 7.6.22 Address 0x14, CLOCK_DIVIDERS0
        1. Table 21. Address 0x14, CLOCK_DIVIDERS0 Field Descriptions
      23. 7.6.23 Address 0x15, CLOCK_DIVIDERS1
        1. Table 22. Address 0x15, CLOCK_DIVIDERS1 Field Descriptions
      24. 7.6.24 Address 0x16, CLOCK_DIVIDERS2 (LDC1614 only)
        1. Table 23. Address 0x16, CLOCK_DIVIDERS2 Field Descriptions
      25. 7.6.25 Address 0x17, CLOCK_DIVIDERS3 (LDC1614 only)
        1. Table 24. Address 0x17, CLOCK_DIVIDERS3
      26. 7.6.26 Address 0x18, STATUS
        1. Table 25. Address 0x18, STATUS Field Descriptions
      27. 7.6.27 Address 0x19, ERROR_CONFIG
        1. Table 26. Address 0x19, ERROR_CONFIG
      28. 7.6.28 Address 0x1A, CONFIG
        1. Table 27. Address 0x1A, CONFIG Field Descriptions
      29. 7.6.29 Address 0x1B, MUX_CONFIG
        1. Table 28. Address 0x1B, MUX_CONFIG Field Descriptions
      30. 7.6.30 Address 0x1C, RESET_DEV
        1. Table 29. Address 0x1C, RESET_DEV Field Descriptions
      31. 7.6.31 Address 0x1E, DRIVE_CURRENT0
        1. Table 30. Address 0x1E, DRIVE_CURRENT0 Field Descriptions
      32. 7.6.32 Address 0x1F, DRIVE_CURRENT1
        1. Table 31. Address 0x1F, DRIVE_CURRENT1 Field Descriptions
      33. 7.6.33 Address 0x20, DRIVE_CURRENT2 (LDC1614 only)
        1. Table 32. Address 0x20, DRIVE_CURRENT2 Field Descriptions
      34. 7.6.34 Address 0x21, DRIVE_CURRENT3 (LDC1614 only)
        1. Table 33. DRIVE_CURRENT3 Field Descriptions
      35. 7.6.35 Address 0x7E, MANUFACTURER_ID
        1. Table 34. Address 0x7E, MANUFACTURER_ID Field Descriptions
      36. 7.6.36 Address 0x7F, DEVICE_ID
        1. Table 35. Address 0x7F, DEVICE_ID Field Descriptions
  8. 8 Application and Implementation
    1. 8.1 Application Information
      1. 8.1.1 Conductive Objects in a Time-Varying EM Field
      2. 8.1.2 L-C Resonators
      3. 8.1.3 Multi-Channel and Single Channel Operation
        1. 8.1.3.1 Data Offset
      4. 8.1.4 Sensor Conversion Time
        1. 8.1.4.1 Settling Time
        2. 8.1.4.2 Sensor Activation
      5. 8.1.5 Sensor Current Drive Configuration
        1. 8.1.5.1 Inactive Channel Sensor Connections
        2. 8.1.5.2 Automatic IDRIVE Setting with RP_OVERRIDE_EN
        3. 8.1.5.3 Determining Sensor IDRIVE for an Unknown Sensor RP Using an Oscilloscope
        4. 8.1.5.4 Sensor Auto-Calibration Mode
        5. 8.1.5.5 Channel 0 High Current Drive
      6. 8.1.6 Clocking Architecture
      7. 8.1.7 Input Deglitch Filter
      8. 8.1.8 Device Status Registers
      9. 8.1.9 Multi-Channel Data Readback
    2. 8.2 Typical Application
      1. 8.2.1 System Sensing Functionality
      2. 8.2.2 Example Application
      3. 8.2.3 Design Requirements
      4. 8.2.4 Detailed Design Procedure
      5. 8.2.5 Recommended Initial Register Configuration Values
      6. 8.2.6 Application Curves
      7. 8.2.7 Inductor Self-Resonant Frequency
  9. 9 Power Supply Recommendations
  10. 10Layout
    1. 10.1 Layout Guidelines
    2. 10.2 Layout Example
  11. 11器件和文档支持
    1. 11.1 器件支持
      1. 11.1.1 开发支持
    2. 11.2 文档支持
      1. 11.2.1 相关文档
    3. 11.3 相关链接
    4. 11.4 接收文档更新通知
    5. 11.5 社区资源
    6. 11.6 商标
    7. 11.7 静电放电警告
    8. 11.8 术语表
  12. 12机械、封装和可订购信息

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

7.6.26 Address 0x18, STATUS

Figure 39. Address 0x18, STATUS
15 14 13 12 11 10 9 8
ERR_CHAN ERR_UR ERR_OR ERR_WD ERR_AHE ERR_ALE ERR_ZC
7 6 5 4 3 2 1 0
RESERVED DRDY RESERVED UNREADCONV0 UNREADCONV1 UNREADCONV2 UNREADCONV3
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset

Table 25. Address 0x18, STATUS Field Descriptions

Bit Field Type Reset Description
15:14 ERR_CHAN R 00 Error Channel
Indicates which channel has generated a Flag or Error. Once flagged, any reported error is latched and maintained until either the STATUS register or the DATAx_MSB register corresponding to the Error Channel is read.
b00: Channel 0 is source of flag or error.
b01: Channel 1 is source of flag or error.
b10: Channel 2 is source of flag or error (LDC1614 only).
b11: Channel 3 is source of flag or error (LDC1614 only).
13 ERR_UR R 0 Conversion Under-range Error
b0: No Conversion Under-range error was recorded since the last read of the STATUS register.
b1: An active channel has generated a Conversion Under-range error. Refer to STATUS.ERR_CHAN field to determine which channel is the source of this error.
12 ERR_OR R 0 Conversion Over-range Error
b0: No Conversion Over-range error was recorded since the last read of the STATUS register.
b1: An active channel has generated a Conversion Over-range error. Refer to STATUS.ERR_CHAN field to determine which channel is the source of this error.
11 ERR_WD R 0 Watchdog Timeout Error
b0: No Watchdog Timeout error was recorded since the last read of the STATUS register.
b1: An active channel has generated a Watchdog Timeout error. Refer to STATUS.ERR_CHAN field to determine which channel is the source of this error.
10 ERR_AHE R 0 Sensor Amplitude High Error
b0: No Amplitude High error was recorded since the last read of the STATUS register.
b1: An active channel has generated an Amplitude High error - this occurs when the sensor amplitude is above a nominal 1.8 V. It is recommended to reduce the corresponding sensor IDRIVEx setting. Refer to STATUS.ERR_CHAN field to determine which channel is the source of this error.
9 ERR_ALE R 0 Sensor Amplitude Low Error
b0: No Amplitude Low error was recorded since the last read of the STATUS register.
b1: An active channel has generated an Amplitude Low error - this occurs when the sensor amplitude is below a nominal 1.2 V. Refer to STATUS.ERR_CHAN field to determine which channel is the source of this error.
8 ERR_ZC R 0 Zero Count Error
b0: No Zero Count error was recorded since the last read of the STATUS register.
b1: An active channel has generated a Zero Count error. Refer to STATUS.ERR_CHAN field to determine which channel is the source of this error.
7 Reserved R 0 Reserved. Reads 0.
6 DRDY R 0 Data Ready Flag
b0: No new conversion result was recorded in the STATUS register.
b1: A new conversion result is ready. When in Single Channel Conversion, this indicates a single conversion is available. When in sequential mode, this indicates that a new conversion result for all active channels is now available.
5:4 Reserved R 00 Reserved. Reads 00b.
3 UNREADCONV0 R 0 Channel 0 Unread Conversion
b0: No unread conversion is present for Channel 0.
b1: An unread conversion is present for Channel 0.
Read Registers DATA0_MSB and DATA0_LSB to retrieve conversion results.
2 UNREADCONV1 R 0 Channel 1 Unread Conversion
b0: No unread conversion is present for Channel 1.
b1: An unread conversion is present for Channel 1.
Read Registers DATA1_MSB and DATA1_LSB to retrieve conversion results.
1 UNREADCONV2 R 0 Channel 2 Unread Conversion
b0: No unread conversion is present for Channel 2.
b1: An unread conversion is present for Channel 2.
Read Registers DATA2_MSB and DATA2_LSB to retrieve conversion results (LDC1614 only)
0 UNREADCONV3 R 0 Channel 3 Unread Conversion
b0: No unread conversion is present for Channel 3.
b1: An unread conversion is present for Channel 3.
Read Registers DATA3_MSB and DATA3_LSB to retrieve conversion results (LDC1614 only)
千亿体育app官网登录(中国)官方网站IOS/安卓通用版/手机APP | 米乐app下载官网（中国）|ios|Android/通用版APP最新版 | 米乐|米乐·M6（中国大陆）官方网站 | 千亿体育登陆地址 | 华体会体育（中国）HTH·官方网站 | 千赢qy国际_全站最新版千赢qy国际V6.2.14安卓/IOS下载 | 18新利网v1.2.5|中国官方网站 | bob电竞真人（中国官网）安卓/ios苹果/电脑版【1.97.95版下载】 | 千亿体育app官方下载(中国)官方网站IOS/安卓/手机APP下载安装 |