ZHCSIM6F December 2010 – August 2018 LM137QML
PRODUCTION DATA.
- 1 特性
- 2 应用
- 3 说明
- 4 修订历史记录
- 5 Pin Configuration and Functions
-
6 Specifications
- 6.1 Absolute Maximum Ratings
- 6.2 ESD Ratings
- 6.3 Recommended Operating Conditions
- 6.4 Thermal Information
- 6.5 Quality Conformance Inspection
- 6.6 LM137H 883 Electrical Characteristics DC Parameters
- 6.7 LM137H 883 Electrical Characteristics AC Parameters
- 6.8 LM137K 883 Electrical Characteristics DC Parameters
- 6.9 LM137K 883 Electrical Characteristics AC Parameters
- 6.10 LM137H RH Electrical Characteristics DC Parameters 5962P9951708VXA
- 6.11 LM137H RH Electrical Characteristics AC Parameters 5962P9951708VXA
- 6.12 LM137H RH Electrical Characteristics DC Parameters Drift Values 5962P9951708VXA
- 6.13 LM137H RH Electrical Characteristics DC Parameters Post Radiation Limits +25°C 5962P9951708VXA
- 6.14 Typical Performance Characteristics
- 7 Detailed Description
- 8 Application and Implementation
- 9 Power Supply Recommendations
- 10器件和文档支持
- 11机械、封装和可订购信息
封装选项
机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息
8.1 Application Information and Schematic Diagram
Full output current not available at high input-output voltages
†C1 = 1 μF solid tantalum or 10 μF aluminum electrolytic required for stabilit
*C2 = 1 μF solid tantalum is required only if regulator is more than 4″ from power-supply filter capacitor
Output capacitors in the range of 1μF to 1000 μF of aluminum or tantalum electrolytic are commonly used to provide improved output impedance and rejection of transients
Figure 14. Adjustable Negative Voltage Regulator
†C1 = 1 μF solid tantalum or 10 μF aluminum electrolytic required for stabilit
*C2 = 1 μF solid tantalum is required only if regulator is more than 4″ from power-supply filter capacitor
Output capacitors in the range of 1μF to 1000 μF of aluminum or tantalum electrolytic are commonly used to provide improved output impedance and rejection of transients