米6体育平台手机版

ZHCSJ12X October 1979 – October 2023 LM139 , LM139A , LM239 , LM239A , LM2901 , LM2901AV , LM2901B , LM2901V , LM339 , LM339A , LM339B

PRODMIX

封装选项

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)

D|14

散热焊盘机械数据 (封装 | 引脚)

订购信息

7.13 Electrical Characteristics for LM2901, LM2901V and LM2901AV

at specified free-air temperature, V_CC = 5 V (unless otherwise noted)

PARAMETER		TEST CONDITIONS⁽¹⁾		T_A⁽²⁾	LM2901			UNIT
PARAMETER		TEST CONDITIONS⁽¹⁾		T_A⁽²⁾	MIN	TYP	MAX	UNIT
V_IO	Input offset voltage	V_IC = V_ICR min, V_O = 1.4 V, V_CC = 5 V to MAX⁽³⁾	Non-A devices	25°C		2	7	mV
			Non-A devices	Full range			15
			A-suffix devices	25°C		1	2
			A-suffix devices	Full range			4
I_IO	Input offset current	V_O = 1.4 V		25°C		5	50	nA
I_IO	Input offset current	V_O = 1.4 V		Full range			200	nA
I_IB	Input bias current	V_O = 1.4 V		25°C		–25	–250	nA
I_IB	Input bias current	V_O = 1.4 V		Full range			–500	nA
V_ICR	Common-mode input-voltage range⁽⁴⁾			25°C	0 to V_CC – 1.5			V
V_ICR	Common-mode input-voltage range⁽⁴⁾			Full range	0 to V_CC – 2			V
A_VD	Large-signal differential-voltage amplification	V_CC = 15 V, V_O = 1.4 V to 11.4 V, R_L ≥ 15 kΩ to V_CC		25°C	25	100		V/mV
I_OH	High-level output current	V_ID = 1 V	V_OH = 5 V	25°C		0.1	50	nA
I_OH	High-level output current	V_ID = 1 V	V_OH = V_CC MAX⁽³⁾	Full range			1	μA
V_OL	Low-level output voltage	V_ID = –1 V, I_OL = 4 mA	Non-V devices	25°C		150	500	mV
			V-suffix devices	25°C		150	400
			All devices	Full range			700
I_OL	Low-level output current	V_ID = –1 V,	V_OL = 1.5 V	25°C	6	16		mA
I_CC	Supply current (four comparators)	V_O = 2.5 V, No load	V_CC = 5 V	25°C		0.8	2	mA
I_CC	Supply current (four comparators)	V_O = 2.5 V, No load	V_CC = MAX⁽³⁾	25°C		1	2.5	mA

(1) All characteristics are measured with zero common-mode input voltage, unless otherwise specified.

(2) Full range (MIN to MAX) for LM2901 is –40°C to +125°C. All characteristics are measured with zero common-mode input voltage, unless otherwise specified.

(3) V_CC MAX = 30 V for non-V devices, and 32 V for V-suffix devices

(4) The voltage at either input or common-mode must not be allowed to go negative by more than 0.3 V. The upper end of the common-mode voltage range is V_CC+ – 1.5 V; however, one input can exceed V_CC, and the comparator will provide a proper output state as long as the other input remains in the common-mode range. Either or both inputs can go to V_CC MAX without damage.