米6体育平台手机版

ZHCSIA9L may 2003 – august 2023 LM2903-Q1 , LM2903B-Q1

PRODUCTION DATA

封装选项

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)

D|8
DGK|8
DDF|8
PW|8
DSG|8

散热焊盘机械数据 (封装 | 引脚)

DSG|8
- QFND569C

订购信息

3.10 Electrical Characteristics LM2903B - Q1

V_S = 5 V, V_CM = (V–) ; T_A = 25°C (unless otherwise noted).

PARAMETER		TEST CONDITIONS	MIN	TYP	MAX	UNIT
V_IO	Input offset voltage	V_S = 5 to 36V	–2.5	±0.37	2.5	mV
V_IO	Input offset voltage	V_S = 5 to 36V, T_A = –40°C to +125°C	–4		4	mV
V_IO	Input offset voltage, DGK package only	V_S = 5 to 36V	–3.5	±0.37	3.5	mV
V_IO	Input offset voltage, DGK package only	V_S = 5 to 36V, T_A = –40°C to +125°C	–5		5	mV
I_B	Input bias current			–3.5	–25	nA
I_B	Input bias current	T_A = –40°C to +125°C			–50	nA
I_OS	Input offset current		–10	±0.5	10	nA
I_OS	Input offset current	T_A = –40°C to +125°C	–25		25	nA
V_CM	Common mode range⁽¹⁾	V_S = 3 to 36V	(V–)		(V+) – 1.5	V
V_CM	Common mode range⁽¹⁾	V_S = 3 to 36V, T_A = –40°C to +125°C	(V–)		(V+) – 2.0	V
A_VD	Large signal differential voltage amplification	V_S = 15V, V_O = 1.4V to 11.4V; R_L ≥ 15k to (V+)	50	200		V/mV
V_OL	Low level output Voltage {swing from (V–)}	I_SINK ≤ 4mA, V_ID = -1V		110	400	mV
V_OL	Low level output Voltage {swing from (V–)}	I_SINK ≤ 4mA, V_ID = -1V T_A = –40°C to +125°C			550	mV
I_OH-LKG	High-level output leakage current	(V+) = V_O= 5 V; V_ID= 1V		0.1	20	nA
I_OH-LKG	High-level output leakage current	(V+) = V_O= 36V; V_ID= 1V		0.3	50	nA
I_OL	Low level output current	V_OL= 1.5V; V_ID= -1V; V_S = 5V	6	21		mA
I_Q	Quiescent current (all comparators)	V_S = 5 V, no load		400	600	µA
I_Q	Quiescent current (all comparators)	V_S = 36 V, no load, T_A= –40°C to +125°C		550	800	µA

(1) The voltage at any input should not be allowed to go negative by more than 0.3 V. The upper end of the input voltage range is V_CC − 1.5 V for one input, and the other input can exceed the V_CC level; the comparator provides a proper output state. Either or both inputs can go to 36 V without damage.