SNVSB95 July   2019 LM3421-Q1 , LM3423-Q1

PRODUCTION DATA.  

  1. 1 Features
  2. 2 Applications
  3. 3 Description
    1.     Device Images
      1.      Typical Boost Application
  4. 4 Revision History
  5. 5 Device Comparison
  6. 6 Pin Configuration and Functions
    1.     Pin Functions
  7. 7 Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 ESD Ratings
    3. 7.3 Recommended Operating Conditions
    4. 7.4 Thermal Information
    5. 7.5 Electrical Characteristics
    6. 7.6 Typical Characteristics
  8. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1  Current Regulators
      2. 8.3.2  Predictive Off-Time (PRO) Control
      3. 8.3.3  Average LED Current
      4. 8.3.4  Analog Dimming
      5. 8.3.5  Current Sense and Current Limit
      6. 8.3.6  Overcurrent Protection
      7. 8.3.7  Zero Current Shutdown
      8. 8.3.8  Control Loop Compensation
      9. 8.3.9  Start-Up Regulator
      10. 8.3.10 Overvoltage Lockout (OVLO)
      11. 8.3.11 Input Undervoltage Lockout (UVLO)
        1. 8.3.11.1 UVLO Only
        2. 8.3.11.2 PWM Dimming and UVLO
      12. 8.3.12 PWM Dimming
      13. 8.3.13 LM3423-Q1 Only: DPOL, FLT, TIMR, and LRDY
  9. 9 Application and Implementation
    1. 9.1 Application Information
      1. 9.1.1 Inductor
      2. 9.1.2 LED Dynamic Resistance
      3. 9.1.3 Output Capacitor
      4. 9.1.4 Input Capacitors
      5. 9.1.5 Main MOSFET / Dimming MOSFET
      6. 9.1.6 Re-Circulating Diode
      7. 9.1.7 Boost Inrush Current
      8. 9.1.8 Switching Frequency
    2. 9.2 Typical Applications
      1. 9.2.1 Basic Topology Schematics
        1. 9.2.1.1 Design Requirements
        2. 9.2.1.2 Detailed Design Procedure
          1. 9.2.1.2.1  Operating Point
          2. 9.2.1.2.2  Switching Frequency
          3. 9.2.1.2.3  Average LED Current
          4. 9.2.1.2.4  Inductor Ripple Current
          5. 9.2.1.2.5  LED Ripple Current
          6. 9.2.1.2.6  Peak Current Limit
          7. 9.2.1.2.7  Loop Compensation
          8. 9.2.1.2.8  Input Capacitance
          9. 9.2.1.2.9  N-channel FET
            1. 9.2.1.2.9.1 Boost and Buck-Boost
          10. 9.2.1.2.10 Diode
          11. 9.2.1.2.11 Output OVLO
          12. 9.2.1.2.12 Input UVLO
          13. 9.2.1.2.13 PWM Dimming Method
          14. 9.2.1.2.14 Analog Dimming Method
      2. 9.2.2 LM3421 Buck-Boost Application
        1. 9.2.2.1 Design Requirements
        2. 9.2.2.2 Detailed Design Procedure
          1. 9.2.2.2.1  Operating Point
          2. 9.2.2.2.2  Switching Frequency
          3. 9.2.2.2.3  Average LED Current
          4. 9.2.2.2.4  Inductor Ripple Current
          5. 9.2.2.2.5  Output Capacitance
          6. 9.2.2.2.6  Peak Current Limit
          7. 9.2.2.2.7  Loop Compensation
          8. 9.2.2.2.8  Input Capacitance
          9. 9.2.2.2.9  N-channel FET
          10. 9.2.2.2.10 Diode
          11. 9.2.2.2.11 Input UVLO
          12. 9.2.2.2.12 Output OVLO
        3. 9.2.2.3 Application Curve
      3. 9.2.3 LM3421-Q1 BOOST Application
        1. 9.2.3.1 Design Requirements
        2. 9.2.3.2 Detailed Design Procedure
      4. 9.2.4 LM3421-Q1 Buck-Boost Application
        1. 9.2.4.1 Design Requirements
        2. 9.2.4.2 Detailed Design Procedure
      5. 9.2.5 LM3423-Q1 Boost Application
        1. 9.2.5.1 Design Requirements
        2. 9.2.5.2 Detailed Design Procedure
      6. 9.2.6 LM3421 Buck-Boost Application
        1. 9.2.6.1 Design Requirements
        2. 9.2.6.2 Detailed Design Procedure
      7. 9.2.7 LM3423 Buck Application
        1. 9.2.7.1 Design Requirements
        2. 9.2.7.2 Detailed Design Procedure
      8. 9.2.8 LM3423 Buck-Boost Application
        1. 9.2.8.1 Design Requirements
        2. 9.2.8.2 Detailed Design Procedure
      9. 9.2.9 LM3421 SEPIC Application
        1. 9.2.9.1 Design Procedure
        2. 9.2.9.2 Detailed Design Procedure
  10. 10Power Supply Recommendations
    1. 10.1 General Recommendations
    2. 10.2 Input Supply Current Limit
  11. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Example
  12. 12Device and Documentation Support
    1. 12.1 Device Support
      1. 12.1.1 Third-Party Products Disclaimer
    2. 12.2 Related Links
    3. 12.3 Community Resources
    4. 12.4 Trademarks
    5. 12.5 Electrostatic Discharge Caution
    6. 12.6 Glossary
  13. 13Mechanical, Packaging, and Orderable Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

7.5 Electrical Characteristics

VIN = 14, −40°C ≤ TJ ≤ 150°C unless otherwise specified. Minimum and maximum limits are specified through test, design, or statistical correlation. Typical values represent the most likely parametric norm at TJ = 25°C, and are provided for reference purposes only.
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
START-UP REGULATOR
VCCREG VCC regulation ICC = 0 mA 6.3 7.35 V
ICC = 0 mA, TA = 25°C 6.9
ICCLIM VCC current limit VCC = 0 V 20 mA
VCC = 0 V, TA = 25°C 25
IQ Quiescent current VEN = 3 V, Static LM3421-Q1,
LM3423-Q1		 3
LM3421-Q0,
LM3423-Q0		 3.5 mA
VEN = 3 V, Static, −40°C ≤ TJ ≤ 125°C 2
ISD Shutdown current VEN = 0 V 1 µA
VEN = 0 V, TA = 25°C 0.1
VCC SUPPLY
VCCUV VCC UVLO Threshold VCC Increasing 4.5 V
VCC Increasing, TA = 25°C 4.17
VCC Decreasing 3.7
VCC Decreasing, TA = 25°C 4.08
VCCHYS VCC UVLO Hysteresis TA = 25°C 0.1 V
ENABLE THRESHOLDS
ENST EN start-up threshold VEN Increasing LM3421-Q1,
LM3423-Q1		 2.4 V
LM3421-Q0,
LM3423-Q0		 2.75
VEN Increasing, TA = 25°C 1.75
ENST EN start-up threshold VEN Decreasing 0.8 V
VEN Decreasing, TA = 25°C 1.63
ENSTHYS EN start-up hysteresis TA = 25°C 0.1 V
REN EN pulldown resistance VEN = 1 V LM3421-Q1,
LM3423-Q1		 0.245 2.85 MΩ
LM3421-Q0,
LM3423-Q0		 0.245 3.15
VEN = 1 V, TA = 25°C 0.82
CSH THRESHOLDS
CSH high fault CSH Increasing, TA = 25°C 1.6 V
CSH low condition on LRDY Pin CSH increasing, TA = 25°C LM3423-Q1,
LM3423-Q0 		1 V
OV THRESHOLDS
OVPCB OVP OVLO threshold OVP Increasing 1.185 1.285 V
OVP Increasing, TA = 25°C 1.24
OVPHYS OVP hysteresis source current OVP Active (high) LM3421-Q1,
LM3423-Q1		 20 25 µA
LM3421-Q0,
LM3423-Q0		 20 26
OVP Active (high), TA = 25°C 23
DPOL THRESHOLDS
DPOLTHRSH DPOL logic threshold DPOL Increasing 2 2.6 V
DPOL Increasing, TA = 25°C 2.3
RDPOL DPOL pullup resistance 1200 kΩ
TA = 25°C 500
FAULT TIMER
VFLTTH Fault threshold LM3421-Q1,
LM3423-Q1 		1.185 1.285 V
LM3421-Q0,
LM3423-Q0		 1.185 1.29
TA = 25°C 1.24
IFLT FAULT pin source current LM3421-Q1,
LM3423-Q1		 10 13 µA
LM3421-Q0,
LM3423-Q0		 10 13.5
TA = 25°C 11.5
ERROR AMPLIFIER
VREF CSH reference voltage w/r/t to AGND 1.21 1.26 V
w/r/t to AGND, TJ = 25°C 1.235
Error amplifier input bias current TJ = 25°C –0.6 0 0.6 µA
COMP sink or source current LM3421-Q1,
LM3423-Q1		 22 35 µA
LM3421-Q0,
LM3423-Q0		 22 36
TJ = 25°C 30
Transconductance TJ = 25°C 100 µA/V
Linear input range  (1), TJ = 25°C ±125 mV
Transconductance bandwidth –6dB Unloaded Response (1),
MIN = TJ = 25°C		 0.5 1 MHz
OFF TIMER
tOFF(min) Minimum OFF-time RCT = 1 V through 1 kΩ LM3421-Q1,
LM3423-Q1		 75 ns
LM3421-Q0,
LM3423-Q0		 90
RCT = 1 V through 1 kΩ, TJ = 25°C 35
RRCT RCT reset pulldown resistance LM3421-Q1,
LM3423-Q1		 120 Ω
LM3421-Q0,
LM3423-Q0		 125
TJ = 25°C 36
VRCT VIN/25 reference voltage VIN = 14 V LM3421-Q1,
LM3423-Q1		 540 585 mV
LM3421-Q0,
LM3423-Q0		 540 590
VIN = 14 V, TJ = 25°C 565
f Continuous conduction switching frequency 2.2 nF > CT > 470 pF, TJ = 25°C (See (2)) Hz
PWM COMPARATOR
COMP-to-PWM offset voltage 700 900 mV
TJ = 25°C 800
CURRENT LIMIT (IS)
ILIM Current limit threshold 215 275 mV
TJ = 25°C 245
Current limit delay-to-output LM3421-Q1,
LM3423-Q1		 75 ns
LM3421-Q0,
LM3423-Q0		 90
TJ = 25°C 35
tLEB Leading edge blanking (LEB) time 115 325 ns
TJ = 25°C 210
HIGH SIDE TRANSCONDUCTANCE AMPLIFIER
Input bias current TJ = 25°C 11.5 µA
gM Transconductance 20 mA/V
TJ = 25°C 119
Input offset current –1.5 1.5 µA
TJ = 25°C 0
Input offset voltage –7 7 mV
TJ = 25°C 0
gM(BW) Transconductance bandwidth ICSH = 100 µA(1), TJ = 25°C 250 500 kHz
GATE DRIVER (GATE)
RSRC(GATE) GATE sourcing resistance GATE = High 6 Ω
GATE = High, TJ = 25°C 2
RSNK(GATE) GATE sinking resistance GATE = Low 4.5 Ω
GATE = Low, TJ = 25°C 1.3
DIM DRIVER (DIM, DDRV)
nDIMVTH nDIM / UVLO threshold 1.185 1.285 V
TJ = 25°C 1.24
nDIMHYS nDIM hysteresis current LM3421-Q1,
LM3423-Q1		 20 25 µA
LM3421-Q0,
LM3423-Q0		 20 26
TJ = 25°C 23
RSRC(DDRV) DDRV sourcing resistance DDRV = High 30 Ω
DDRV = High, TJ = 25°C 13.5
RSNK(DDRV) DDRV sinking resistance DDRV = Low 10 Ω
DDRV = Low, TJ = 25°C 3.5
PULLDOWN N-CHANNEL MOSFETS
RRPD RPD pulldown resistance LM3421-Q1,
LM3423-Q1		 300 Ω
LM3421-Q0,
LM3423-Q0		 350
TJ = 25°C 145
RFLT FLT pulldown resistance LM3421-Q1,
LM3423-Q1		 300 Ω
LM3421-Q0,
LM3423-Q0		 350
TJ = 25°C 145
RLRDY LRDY pulldown resistance LM3421-Q1,
LM3423-Q1		 300 Ω
LM3421-Q0,
LM3423-Q0		 350
TJ = 25°C 135
THERMAL SHUTDOWN
TSD Thermal shutdown threshold(1)  TJ = 25°C 165 °C
TSD Thermal shutdown threshold(1)  TJ = 25°C LM3421-Q1,
LM3423-Q1		 165 °C
LM3421-Q0,
LM3423-Q0		 210
THYS Thermal shutdown hysteresis(1)  TJ = 25°C 25 °C
(1) Specified by design. Not production tested.
(2) f = 25/(CT × RT
千亿体育app官网登录(中国)官方网站IOS/安卓通用版/手机APP | 米乐app下载官网（中国）|ios|Android/通用版APP最新版 | 米乐|米乐·M6（中国大陆）官方网站 | 千亿体育登陆地址 | 华体会体育（中国）HTH·官方网站 | 千赢qy国际_全站最新版千赢qy国际V6.2.14安卓/IOS下载 | 18新利网v1.2.5|中国官方网站 | bob电竞真人（中国官网）安卓/ios苹果/电脑版【1.97.95版下载】 | 千亿体育app官方下载(中国)官方网站IOS/安卓/手机APP下载安装 |