SNVS239C October 2004 – October 2015 LM3475
PRODUCTION DATA.
MIN | MAX | UNIT | |||
---|---|---|---|---|---|
VIN | −0.3 | 16 | V | ||
PGATE | −0.3 | 16 | V | ||
FB | −0.3 | 5 | V | ||
EN | −0.3 | 16 | V | ||
Power dissipation (3) | 440 | mW | |||
Lead temperature | Vapor phase (60 s) | 215 | °C | ||
Infrared (15 s) | 220 | ||||
Tstg | Storage temperature | −65 | 1150 | °C |
VALUE | UNIT | |||
---|---|---|---|---|
V(ESD) | Electrostatic discharge | Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1) | 2500 | V |
MIN | NOM | MAX | UNIT | ||
---|---|---|---|---|---|
Supply voltage | 2.7 | 10 | V | ||
TJ | Operating junction temperature | -40 | 125 | °C |
THERMAL METRIC(1) | LM3475 | UNIT | |
---|---|---|---|
DBV (SOT-23) | |||
5 PINS | |||
RθJA | Junction-to-ambient thermal resistance | 164.2 | °C/W |
RθJC(top) | Junction-to-case (top) thermal resistance | 115.3 | °C/W |
RθJB | Junction-to-board thermal resistance | 27.0 | °C/W |
ψJT | Junction-to-top characterization parameter | 12.8 | °C/W |
ψJB | Junction-to-board characterization parameter | 26.5 | °C/W |
RθJC(bot) | Junction-to-case (bottom) thermal resistance | N/A | °C/W |
PARAMETER | TEST CONDITIONS | MIN | TYP | MAX | UNIT | ||
---|---|---|---|---|---|---|---|
IQ | Quiescent current | EN = VIN (PGATE Open) | TJ = 25°C | 260 | µA | ||
TJ = −40°C to +125°C | 170 | 320 | |||||
EN = 0V | TJ = 25°C | 7 | |||||
TJ = −40°C to +125°C | 4 | 10 | |||||
VFB | Feedback voltage | TJ = 25°C | 0.8 | V | |||
TJ = −40°C to +125°C | 0.788 | 0.812 | |||||
%ΔVFB/ΔVIN | Feedback voltage line regulation | 2.7 V < VIN < 10 V | 0.01 | %/V | |||
VHYST | Comparator hysteresis | 2.7 V < VIN < 10 V | TJ = 25°C | 21 | 28 | mV | |
−40°C to +125°C | 21 | 32 | |||||
IFB | FB bias current | TJ = 25°C | 50 | nA | |||
−40°C to +125°C | 600 | ||||||
VthEN | Enable threshold voltage | Increasing | TJ = 25°C | 1.5 | V | ||
−40°C to +125°C | 1.2 | 1.8 | |||||
Hysteresis | 365 | mV | |||||
IEN | Enable leakage current | EN = 10 V | TJ = 25°C | 0.025 | µA | ||
−40°C to +125°C | 1 | ||||||
RPGATE | Driver resistance | Source ISOURCE = 100 mA |
2.8 | Ω | |||
Sink ISink = 100 mA |
1.8 | ||||||
IPGATE | Driver output current | Source VPGATE = 3.5 V CPGATE = 1 nF |
0.475 | A | |||
Sink VPGATE = 3.5 V CPGATE = 1 nF |
1.0 | ||||||
TSS | Soft-start time | 2.7 V < VIN < 10 V (EN Rising) | 4 | ms | |||
TONMIN | Minimum on-time | PGATE Open | 180 | ns | |||
VUVD | Undervoltage detection | Measured at the FB Pin | TJ = 25°C | 0.56 | V | ||
−40°C to +125°C | 0.487 | 0.613 |
IOUT = 2 A |