米6体育平台手机版

SLVS075J April 1989 – January 2015 LM285-1.2 , LM385-1.2 , LM385B-1.2

PRODUCTION DATA.

封装选项

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)

D|8
PW|8
LP|3

散热焊盘机械数据 (封装 | 引脚)

订购信息

9 Application and Implementation

NOTE

Information in the following applications sections is not part of the TI component specification, and TI does not warrant its accuracy or completeness. TI’s customers are responsible for determining suitability of components for their purposes. Customers should validate and test their design implementation to confirm system functionality.

9.1 Application Information

The The LM285-1.2, LM385-1.2, and LM385-1.2 devices create a voltage reference for to be used for a variety of applications including amplifiers, power supplies, and current-sensing circuits. The following application shows how to use these devices to establish a voltage reference.

9.2 Typical Application

Figure 8. Generating Reference Voltage with a Resistive Current Source

9.2.1 Design Requirements

The key design requirement when using this device as a voltage reference is to supply the LM385 with a minimum Cathode Current (I_Z), as indicated in Electrical Characteristics.

9.2.2 Detailed Design Procedure

In order to generate a constant and stable reference voltage, a current greater than I_Z(MIN) must be sourced into the cathode of this device. This can be accomplished using a current regulating device such as LM334 or a simple resistor. For a resistor, its value should be equal to or greater than (V_supply - V_reference) ÷ I_Z(MIN) .

9.2.3 Application Curves

Figure 9. Transient Response

9.3 System Examples

Thermocouple Cold-Junction Compensator

Figure 10. Thermocouple Cold-Junction Compensator

Generating Reference Voltage with a Constant Current Source

Figure 11. Generating Reference Voltage with a Constant Current Source Device