米6体育平台手机版

SLOS456O January 2005 – June 2024

PRODUCTION DATA

封装选项

机械数据 (封装 | 引脚)

DCK|5
- MPDS025J
LP|3
- MSOT002D
DBZ|3
- MPDS108G

散热焊盘机械数据 (封装 | 引脚)

订购信息

6.5 LM4040A20I, LM4040B20I Electrical Characteristics

at industrial temperature range, full-range T_A = –40°C to 85°C (unless otherwise noted)

PARAMETER		TEST CONDITIONS	T_A	LM4040A20I			LM4040B20I			UNIT
PARAMETER		TEST CONDITIONS	T_A	MIN	TYP	MAX	MIN	TYP	MAX	UNIT
V_Z	Reverse breakdown voltage	I_Z = 100μA	25°C		2.048			2.048		V
ΔV_Z	Reverse breakdown voltage tolerance	I_Z = 100μA	25°C	–2		2	–4.1		4.1	mV
ΔV_Z	Reverse breakdown voltage tolerance	I_Z = 100μA	Full range	–15		15	–17		17	mV
I_Z,min	Minimum cathode current		25°C		45	75		45	75	μA
I_Z,min	Minimum cathode current		Full range			80			80	μA
α_VZ	Average temperature coefficient of reverse breakdown voltage ⁽²⁾	I_Z = 10mA	25°C		±20			±20		ppm/°C
		I_Z = 1mA	25°C		±15			±15
		I_Z = 1mA	Full range			±100			±100
		I_Z = 100μA	25°C		±15			±15
	Reverse breakdown voltage change with cathode current change	I_Z,min < I_Z < 1mA	25°C		0.3	0.8		0.3	0.8	mV
		I_Z,min < I_Z < 1mA	Full range			1			1
		1mA < I_Z < 15mA	25°C		2.5	6		2.5	6
		1mA < I_Z < 15mA	Full range			8			8
Z_Z	Reverse dynamic impedance	I_Z = 1mA, f = 120Hz, I_AC = 0.1 I_Z	25°C		0.3	0.8		0.3	0.8	Ω
e_N	Wideband noise	I_Z = 100μA, 10Hz ≤ f ≤ 10kHz	25°C		35			35		μV_RMS
	Long-term stability of reverse breakdown voltage	t = 1000 h, T_A = 25°C ± 0.1°C, I_Z = 100μA			120			120		ppm
V_HYST	Thermal hysteresis⁽¹⁾	ΔT_A = –40°C to 125°C			0.08%			0.08%		—

(1) Thermal hysteresis is defined as the difference in voltage measured at 25°C after cycling to temperature –40°C and the 25°C measurement after cycling to temperature 125°C.

(2) The overtemperature limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage Tolerance ±[(ΔV_R/ΔT)(maxΔT)(V_R)]. Where, ΔV_R/ΔT is the V_R temperature coefficient, maxΔT is the maximum difference in temperature from the reference point of 25°C to T _MIN or T_MAX, and V_R is the reverse breakdown voltage. The total overtemperature tolerance for the different grades in the industrial temperature range where maxΔT = 65°C is shown below:
A-grade: ±0.75% = ±0.1% ±100ppm/°C × 65°C
B-grade: ±0.85% = ±0.2% ±100ppm/°C × 65°C
C-grade: ±1.15% = ±0.5% ±100ppm/°C × 65°C
D-grade: ±1.98% = ±1.0% ±150ppm/°C × 65°C
The total overtemperature tolerance for the different grades in the extended temperature range where max ΔT = 100 °C is shown below:
C-grade: ±1.5% = ±0.5% ±100ppm/°C × 100°C
D-grade: ±2.5% = ±1.0% ±150ppm/°C × 100°C
Therefore, as an example, the A-grade 2.5V LM4040 has an overtemperature Reverse Breakdown Voltage tolerance of ±2.5V × 0.75% = ±19mV.