ZHCSM39F February 2005 – September 2020
PRODUCTION DATA
PARAMETER | TEST CONDITIONS | TA | LM4041DI | UNIT | |||
---|---|---|---|---|---|---|---|
MIN | TYP | MAX | |||||
VREF | Reference voltage | IZ = 100 μA, VZ = 5 V | 25°C | 1.233 | V | ||
Reference voltage tolerance(1) | IZ = 100 μA, VZ = 5 V | 25°C | –12 | 12 | mV | ||
Full range | –24 | 24 | |||||
IZ,min | Minimum cathode current | 25°C | 45 | 75 | μA | ||
Full range | 80 | ||||||
ΔVREF/ΔIZ | Reference voltage change with cathode current change | IZ,min < IZ < 1 mA | 25°C | 0.7 | 2 | mV | |
Full range | 2.5 | ||||||
1 mA < IZ < 12 mA | 25°C | 2 | 6 | ||||
Full range | 8 | ||||||
ΔVREF/ΔVKA | Reference voltage change with output voltage change | IZ = 1 mA | 25°C | –1.55 | –2 | mV/V | |
Full range | –3 | ||||||
IFB | Feedback current | 25°C | 60 | 150 | nA | ||
Full range | 200 | ||||||
αVREF | Average temperature coefficient of reference voltage(1) | IZ = 10 mA, VZ = 5 V | 25°C | ±20 | ppm/°C | ||
IZ = 1 mA, VZ = 5 V | 25°C | ±15 | |||||
Full range | ±150 | ||||||
IZ = 100 μA, VZ = 5 V | 25°C | ±15 | |||||
ZZ | Reverse dynamic impedance | IZ = 1 mA, f = 120 Hz, IAC = 0.1 IZ, VZ = VREF | 25°C | 0.3 | Ω | ||
IZ = 1 mA, f = 120 Hz, IAC = 0.1 IZ, VZ = 10 V | 25°C | 2 | |||||
eN | Wideband noise | IZ = 100 μA, VZ = VREF, 10 Hz ≤ f ≤ 10 kHz | 25°C | 20 | μVRMS | ||
Long-term stability of reverse breakdown voltage | t = 1000 h, TA = 25°C ± 0.1°C, IZ = 100 μA | 25°C | 120 | ppm |