The output voltage of LM61460 is externally adjustable using a resistor divider network. The range of recommended output voltage is found in Section 7.2. The divider network is comprised of R_FBT and R_FBB, and closes the loop between the output voltage and the converter. The converter regulates the output voltage by holding the voltage on the FB pin equal to the internal reference voltage, V_REF. The resistance of the divider is a compromise between excessive noise pickup and excessive loading of the output. Smaller values of resistance reduce noise sensitivity but also reduce the light load efficiency. The recommended value for R_FBT is 100 kΩ with a maximum value of 1 MΩ. If 1 MΩ is selected for R_FBT, then a feedforward capacitor must be used across this resistor to provide adequate loop phase margin (see Section 9.2.2.10). Once R_FBT is selected, Equation 3 is used to select R_FBB. V_REF is nominally 1 V. For this 5-V example, R_FBT = 100 kΩ and R_FBB = 24.9 kΩ are chosen.