ZHCSSM7D May   1998  – November 2023 LM6171

PRODUCTION DATA  

  1.   1
  2. 1 特性
  3. 2 应用
  4. 3 说明
  5. 4 Pin Configuration and Functions
  6. 5 Specifications
    1. 5.1 Absolute Maximum Ratings
    2. 5.2 ESD Ratings
    3. 5.3 Recommended Operating Conditions
    4. 5.4 Thermal Information
    5. 5.5 Electrical Characteristics: ±15 V
    6. 5.6 Electrical Characteristics: ±5 V
    7. 5.7 Typical Characteristics: LM6171A Only
    8. 5.8 Typical Characteristics
  7. 6 Detailed Description
    1. 6.1 Overview
    2. 6.2 Functional Block Diagram
    3. 6.3 Feature Description
      1. 6.3.1 Circuit Operation
      2. 6.3.2 Slew Rate
    4. 6.4 Device Functional Modes
  8. 7 Application and Implementation
    1. 7.1 Application Information
      1. 7.1.1 Compensation for Input Capacitance
      2. 7.1.2 Power Supply Bypassing
      3. 7.1.3 Termination
      4. 7.1.4 Driving Capacitive Loads
      5. 7.1.5 Using Probes
      6. 7.1.6 Components Selection and Feedback Resistor
    2. 7.2 Typical Applications
      1. 7.2.1 Fast Instrumentation Amplifier
      2. 7.2.2 Multivibrator
      3. 7.2.3 Pulse Width Modulator
    3. 7.3 Power Supply Recommendations
      1. 7.3.1 Power Dissipation
    4. 7.4 Layout
      1. 7.4.1 Layout Guidelines
        1. 7.4.1.1 Printed Circuit Boards and High-Speed Op Amps
  9. 8 Device and Documentation Support
    1. 8.1 接收文档更新通知
    2. 8.2 支持资源
    3. 8.3 Trademarks
    4. 8.4 静电放电警告
    5. 8.5 术语表
  10. 9 Revision History
  11. 10Mechanical, Packaging, and Orderable Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

5.5 Electrical Characteristics: ±15 V

at TJ = 25°C, V+ = 15 V, V− = −15 V, VCM = 0 V, and RL = 1 kΩ (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN(2) TYP(1) MAX(2) UNIT
VOS Input offset voltage LM6171A 1.5 3 mV
TA = –40°C to +85°C 5
LM6171B 1.5 6
TA = –40°C to +85°C 8
TCVOS Input offset voltage average drift 6 μV/°C
IB Input bias current 1 3 μA
TA = –40°C to +85°C 4
IOS Input offset current 0.03 2
TA = –40°C to +85°C 3
RIN Input resistance Common-mode 40 MΩ
Differential-mode 4.9
RO Open-loop output resistance 14 Ω
CMRR Common-mode rejection ratio LM6171A,
VCM = ±10 V		 80 110 dB
TA = –40°C to +85°C 75
LM6171B,
VCM = ±10 V		 75 110
TA = –40°C to +85°C 70
PSRR Power supply rejection ratio LM6171A,
VS = ±5 V to ±15 V		 85 95 dB
TA = –40°C to +85°C 80
LM6171B,
VS = ±5 V to ±15 V		 80 95
TA = –40°C to +85°C 75
VCM Input common-mode voltage CMRR > 60 dB ±13.5 V
AV Large signal voltage gain(3) RL = 1 kΩ, VOUT = ±5 V 80 90 dB
TA = –40°C to +85°C 70
RL = 100 Ω, VOUT = ±5 V 70 83
TA = –40°C to +85°C 60
VO Output swing RL = 1 kΩ, sourcing 12.5 13.3 V
TA = –40°C to +85°C 12
RL = 1 kΩ, sinking −12.5 −13.3
TA = –40°C to +85°C −12
RL = 100 Ω, sourcing 9 11.6
TA = –40°C to +85°C 8.5
RL = 100 Ω, sinking −9 −10.5
TA = –40°C to +85°C −8.5
Continuous output current (open loop)(4) Sourcing, RL = 100 Ω 90 116 mA
TA = –40°C to +85°C 85
Sinking, RL = 100 Ω 90 105
TA = –40°C to +85°C 85
Continuous output current (in linear region) Sourcing, RL = 100 Ω 100 mA
Sinking, RL = 100 Ω  80
ISC Output short circuit current Sourcing 135 mA
Sinking 135
IS Supply current 2.5 4 mA
TA = –40°C to +85°C 4.5
SR Slew rate(5) AV = +2, VIN = 13 VPP 3600 V/μs
AV = +2, VIN = 10 VPP 3000
Unity-gain bandwidth LM6171A 76 MHz
LM6171B 100 MHz
−3-dB frequency LM6171A AV = +1 200 MHz
AV = +2 75
LM6171B AV = +1 160
AV = +2 62
φm Phase margin LM6171A 58 Deg
LM6171B 40
ts Settling time (0.1%) AV = −1, VOUT = ±5 V,
RL = 500 Ω		 LM6171A 21 ns
LM6171B 48
tp Propagation delay AV = −2, VIN = ±5 V,
RL = 500 Ω		 LM6171A 4.1 ns
LM6171B 6
AD Differential gain(6) 0.03 %
φD Differential phase(6) 0.5 °
en Input-referred voltage noise f = 10 kHz 12 nV/√Hz
in Input-referred current noise f = 10 kHz  1 pA/√Hz
(1) Typical values represent the most likely parametric norm
(2) All limits are specified by testing or statistical analysis.
(3) Large-signal voltage gain is the total output swing divided by the input signal required to produce that swing. For VS = ±15 V,
VOUT = ±5 V. For VS = +5 V, VOUT = ±1 V.
(4) The open-loop output current is the output swing with the 100-Ω load resistor divided by that resistor.
(5) Slew rate is the average of the rising and falling slew rates.
(6) Differential gain and phase are measured with AV = +2, VIN = 1 VPP at 3.58 MHz and both input and output 75 Ω terminated.
千亿体育app官网登录(中国)官方网站IOS/安卓通用版/手机APP | 米乐app下载官网（中国）|ios|Android/通用版APP最新版 | 米乐|米乐·M6（中国大陆）官方网站 | 千亿体育登陆地址 | 华体会体育（中国）HTH·官方网站 | 千赢qy国际_全站最新版千赢qy国际V6.2.14安卓/IOS下载 | 18新利网v1.2.5|中国官方网站 | bob电竞真人（中国官网）安卓/ios苹果/电脑版【1.97.95版下载】 | 千亿体育app官方下载(中国)官方网站IOS/安卓/手机APP下载安装 |