Connect ANODE, GATE and CATHODE pins of LM74700-Q1 close to the MOSFET's SOURCE, GATE and DRAIN pins.
The high current path of for this solution is through the MOSFET, therefore it is important to use thick traces for source and drain of the MOSFET to minimize resistive losses.
The charge pump capacitor across VCAP and ANODE pins must be kept away from the MOSFET to lower the thermal effects on the capacitance value.
The Gate pin of the LM74700-Q1 must be connected to the MOSFET gate with short trace. Avoid excessively thin and long trace to the Gate Drive.
Keep the GATE pin close to the MOSFET to avoid increase in MOSFET turn-off delay due to trace resistance.
Obtaining acceptable performance with alternate
layout schemes is possible, however the layout
shown in the Layout Example is intended as a
guideline and to produce good results.