米6体育平台手机版

ZHCSOM5D April 2006 – September 2021 LMH6321

PRODUCTION DATA

封装选项

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)

KTW|7
DDA|8

散热焊盘机械数据 (封装 | 引脚)

KTW|7
- PPTD278
DDA|8
- PPTD058I

订购信息

5.5 ±5 V Electrical Characteristics

The following specifications apply for Supply Voltage = ±5 V, V_CM = 0, R_L ≥ 100 kΩ and R_S = 50 Ω, C_L Open, unless otherwise noted. Italicized limits apply for T_A = T_J = T_MIN to T_MAX; all other limits T_A = T_J = 25°C.

Symbol	Parameter	Conditions		Min	Typ	Max	Units
A_V	Voltage Gain	R_L = 1 kΩ, V_IN = ±3 V		0.99 0.98	0.994		V/V
A_V	Voltage Gain	R_L = 50 Ω, V_IN = ±3 V		0.86 0.84	0.92		V/V
V_OS	Offset Voltage	R_L = 1 kΩ, R_S = 0 V			±2.5	±35 ±50	mV
I_B	Input Bias Current	V_IN = 0 V, R_L = 1 kΩ, R_S = 0 V			±2	±15 ±17	μA
R_IN	Input Resistance	R_L = 50 Ω			250		kΩ
C_IN	Input Capacitance				3.5		pF
R_O	Output Resistance	I_OUT = ±10 mA			5		Ω
I_S	Power Supply Current	R_L = ∞, V_IN = 0 V			10	13.5 14.7	mA
I_S	Power Supply Current	R_L = ∞, V_IN = 0 V	750 μA into CL Pin		14	17.5 19.5	mA
V_O1	Positive Output Swing	I_O = 300 mA, R_S = 0 V, V_IN = ±V_S		1.3 0.9	1.9		V
V_O1	Negative Output Swing	I_O = 300 mA, R_S = 0 V, V_IN = ±V_S			−1.3	−0.5 −0.1	V
V_O2	Positive Output Swing	R_L = 1 kΩ, R_S = 0 V, V_IN = ±V_S		3.2 2.9	3.5		V
V_O2	Negative Output Swing	R_L = 1 kΩ, R_S = 0 V, V_IN = ±V_S			−3.5	−3.1 −2.9	V
V_O3	Positive Output Swing	R_L = 50 Ω, R_S = 0 V, V_IN = ±V_S		2.8 2.5	3.1		V
V_O3	Negative Output Swing	R_L = 50 Ω, R_S = 0 V, V_IN = ±V_S			−3.0	−2.6 −2.4	V
PSSR	Power Supply Rejection Ratio	R_L = 1 kΩ, V_IN = 0, V_S = ±5 V to ±15 V	Positive	58 54	66		dB
PSSR	Power Supply Rejection Ratio	R_L = 1 kΩ, V_IN = 0, V_S = ±5 V to ±15 V	Negative	58 54	64		dB
I_SC1	Output Short Circuit Current	V_O = 0 V, Program Current into C_L = 25 μA	Sourcing V_IN = +3 V	4.5 4.5	9	14.0 15.5	mA
		V_O = 0 V, Program Current into C_L = 25 μA	Sinking V_IN = −3 V	4.5 4.5	9	14.0 15.5
		V_O = 0 V, Program Current into C_L = 750 μA	Sourcing V_IN = +3 V	275 270	290	305 320
		V_O = 0 V, Program Current into C_L = 750 μA	Sinking V_IN = −3 V	275 270	290	310 320
I_SC2	Output Short Circuit Current Source	R_S = 0 V, V_IN = +3 V1 2		300	470		mA
I_SC2	Output Short Circuit Current Sink	R_S = 0 V, V_IN = −3 V1 2		300	400		mA
SR	Slew Rate	V_IN = ±2 V_PP, R_L = 1 kΩ			450		V/μs
SR	Slew Rate	V_IN = ±2 V_PP, R_L = 50 Ω			210		V/μs
BW	−3 dB Bandwidth	V_IN = ±20 mV_PP, R_L = 50 Ω			90		MHz
LSBW	Large Signal Bandwidth	V_IN = 2 V_PP, R_L = 50 Ω			39		MHz
T_SD	Thermal Shutdown	Temperature			170		°C
T_SD	Thermal Shutdown	Hysteresis			10		°C
V/I Section
CLV_OS	Current Limit Input Offset Voltage	R_L = 1 kΩ, GND = 0 V			2.7	+5 ±5.0	mV
CLI_B	Current Limit Input Bias Current	R_L = 1 kΩ, C_L = 0 V		−0.5 −0.6	−0.2		μA
CL CMRR	Current Limit Common Mode Rejection Ratio	R_L = 1 kΩ, GND = −3 V to +4 V		60 56	65		dB

V_IN = + or −4 V at T_J = −40°C.
For the condition where the C_L pin is left open the output current should not be continuous, but instead, should be limited to low duty cycle pulse mode such that the RMS output current is less than or equal to 300 mA.