6.6 Electrical Characteristics ±3.3 V
VS = ±3.3 V, RL = 100 Ω, AV = 2 V/V, RF = 575 Ω; unless otherwise specified.
|
PARAMETER |
TEST CONDITIONS(2) |
MIN |
TYP |
MAX |
UNIT |
| FREQUENCY DOMAIN PERFORMANCE |
| SSBW |
−3 dB Bandwidth |
VOUT = 0.5 VPP |
|
475 |
|
MHz |
| LSBW |
−3 dB Bandwidth |
VOUT = 2.0 VPP |
|
375 |
|
MHz |
| 0.1 dBBW |
0.1 dB Bandwidth |
VOUT = 0.5 VPP |
|
100 |
|
MHz |
| GFP |
Peaking |
DC to 200 MHz |
|
0.4 |
|
dB |
| XTLK |
Channel to Channel Crosstalk |
All Hostile, f = 5 MHz |
|
−85 |
|
dBc |
| TIME DOMAIN RESPONSE |
| TRL |
Rise and Fall Time |
2-V Step |
|
2 |
|
ns |
| TSS |
Settling Time to 0.05% |
2-V Step |
|
20 |
|
ns |
| OS |
Overshoot |
2-V Step |
|
5% |
|
|
| SR |
Slew Rate |
2-V Step |
|
1400 |
|
V/μs |
| DISTORTION |
| HD2 |
2nd Harmonic Distortion |
2 VPP, 10 MHz |
|
−67 |
|
dBc |
| HD3 |
3rd Harmonic Distortion |
2 VPP, 10 MHz |
|
−87 |
|
dBc |
| STATIC, DC PERFORMANCE |
| VIO |
Input Offset Voltage |
VIN = 0 V |
|
-5 |
|
mV |
| IBN |
Input Bias Current(6) |
VIN = 0 V |
|
-3 |
|
μA |
| PSRR |
Power Supply Rejection Ratio |
DC, Input Referred |
|
49 |
|
dB |
| ICC |
Supply Current |
No Load |
|
12 |
|
mA |
| VIH |
Logic High Threshold |
Select & Enable Pins (SD & EN) |
1.3 |
|
|
V |
| VIL |
Logic Low Threshold |
Select & Enable Pins (SD & EN) |
|
|
0.4 |
V |
| MISCELLANEOUS PERFORMANCE |
| RIN+ |
Input Resistance |
|
|
5 |
|
kΩ |
| CIN |
Input Capacitance |
|
|
0.8 |
|
pF |
| ROUT |
Output Resistance |
|
|
0.06 |
|
Ω |
| VO |
Output Voltage Range |
No Load |
|
±2 |
|
V |
| VOL |
RL = 100 Ω |
|
±1.8 |
|
V |
| CMIR |
Input Voltage Range |
|
|
±1.2 |
|
V |
| IO |
Linear Output Current |
VIN = 0 V |
|
±60 |
|
mA |
| ISC |
Short Circuit Current |
VIN = ±1 V, Output Shorted to Ground |
|
±150 |
|
mA |
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is intended to be functional, but specific performance is not ensured. For ensured specifications, see the
Electrical Characteristics ±5 V tables
(2) Electrical Table values apply only for factory testing conditions at the temperature indicated. Factory testing conditions result in very limited self-heating of the device such that T
J = T
A. No ensure of parametric performance is indicated in the electrical tables under conditions of internal self heating where T
J > T
A. See
Application and Implementation for information on temperature de-rating of this device. Min/Max ratings are based on product testing, characterization and simulation. Individual parameters are tested as noted.
(3) The maximum output current (I
OUT) is determined by the device power dissipation limitations (The junction temperature cannot be allowed to exceed 150°C). See the
Power Dissipation for more details. A short circuit condition should be limited to 5 seconds or less.
(4) Human Body model, 1.5 kΩ in series with 100 pF. Machine model, 0 Ω In series with 200 pF.
(5) Parameters guaranteed by electrical testing at 25°C.
(6) Positive Value is current into device.