ZHCSW86F July   2005  – August 2024 LMH6702QML-SP

PRODUCTION DATA  

  1.   1
  2. 1特性
  3. 2应用
  4. 3说明
  5. 4Pin Configuration and Functions
  6. 5Specifications
    1. 5.1 Absolute Maximum Ratings
    2. 5.2 Recommended Operating Conditions
    3. 5.3 Quality Conformance Inspection
    4. 5.4 Electrical Characteristics: DC Parameters
    5. 5.5 Electrical Characteristics: AC Parameters
    6. 5.6 Electrical Characteristics: Drift Values Parameters
    7. 5.7 Typical Characteristics
  7. 6Application and Implementation
    1. 6.1 Application Information
      1. 6.1.1 Feedback Resistor
      2. 6.1.2 Harmonic Distortion
      3. 6.1.3 Capacitive Load Drive
      4. 6.1.4 DC Accuracy and Noise
    2. 6.2 Layout
      1. 6.2.1 Layout Guidelines
  8. 7Device and Documentation Support
    1. 7.1 接收文档更新通知
    2. 7.2 支持资源
    3. 7.3 Trademarks
    4. 7.4 静电放电警告
    5. 7.5 术语表
  9. 8Revision History
  10. 9Mechanical, Packaging, and Orderable Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

Electrical Characteristics: AC Parameters

The following conditions apply (unless otherwise specified)(1)(2):
RL = 100Ω, VCC = ±5VDC, AV = +2 feedback resistor (RF) = 250Ω, gain resistor (RG) = 250Ω
PARAMETER TEST CONDITIONS NOTES MIN MAX UNIT SUB- GROUPS
HD3 3rd harmonic distortion 2VPP at 20MHz –62 dBc 4
GFPL Gain flatness peaking 0.1MHz to 75MHz, VO < 0.5VPP 0.4 dB 4
GFPH Gain flatness peaking > 75MHz, VO < 0.5VPP 2.0 dB 4
GFRH Gain flatness rolloff 75MHz to 125MHz, VO < 0.5VPP 0.2 dB 4
HD2 2nd harmonic distortion 2VPP at 20MHz –52 dBc 4
The algebraic convention, whereby the most negative value is a minimum and most positive is a maximum, is used in this table. Negative current shall be defined as conventional current flow out of a device terminal.
These parameters are not post irradiation tested.