米6体育平台手机版

6.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)⁽¹⁾⁽³⁾

	MIN	MAX	UNIT
Differential Input Voltage		±Supply Voltage
Voltage on any pin (referred to V⁻ pin)		5.5	V
Soldering Information
Infrared or Convection (20 sec)		235	°C
Junction Temperature ⁽²⁾		150	°C
Storage temperature, T_stg	−65	150	°C

(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2) The maximum power dissipation is a function of T_J(MAX), θ_JA. The maximum allowable power dissipation at any ambient temperature is P_D = (T_J(MAX) - T_A)/θ_JA. All numbers apply for packages soldered directly onto a PC board.

(3) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office / Distributors for availability and specifications.

6.2 ESD Ratings

			VALUE	UNIT
V_(ESD)	Electrostatic discharge	Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001⁽¹⁾	±800	V
V_(ESD)	Electrostatic discharge	Machine model	±120	V

(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.

6.3 Recommended Operating Conditions

over operating free-air temperature range (unless otherwise noted)⁽¹⁾

		MIN	MAX	UNIT
Supply Voltage		2.7	5	V
Temperature Range ⁽²⁾		−40	85	°C

(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2) The maximum power dissipation is a function of T_J(MAX), θ_JA. The maximum allowable power dissipation at any ambient temperature is P_D = (T_J(MAX) - T_A)/θ_JA. All numbers apply for packages soldered directly onto a PC board.

6.4 Thermal Information

THERMAL METRIC⁽¹⁾		LMV331-N		LMV339-N		LMV393-N		UNIT
		DCK	DBV	D	PW	D	DGK
		5 PINS	5 PINS	14 PINS	14 PINS	8 PINS	8 PINS
R_θJA	Junction-to-ambient thermal resistance	478	265	145	155	190	23	°C/W

(1) For more information about traditional and new thermal metrics, see the IC Package Thermal Metrics application report, SPRA953.

6.5 2.7-V DC Electrical Characteristics

Unless otherwise specified, all limits ensured for T_J = 25°C, V⁺ = 2.7V, V⁻ = 0V.

	PARAMETER	TEST CONDITIONS	MIN ⁽¹⁾	TYP ⁽²⁾	MAX ⁽¹⁾	UNIT
V_OS	Input Offset Voltage			1.7	7	mV
TCV_OS	Input Offset Voltage Average Drift	At the temperature extremes		5		µV/°C
I_B	Input Bias Current			10	250	nA
I_B	Input Bias Current	At the temperature extremes			400	nA
I_OS	Input Offset Current			5	50	nA
I_OS	Input Offset Current	At the temperature extremes			150	nA
V_CM	Input Voltage Range			−0.1		V
V_CM	Input Voltage Range			2.0		V
V_SAT	Saturation Voltage	I_SINK ≤ 1 mA		120		mV
I_O	Output Sink Current	V_O ≤ 1.5V	5	23		mA
I_S	Supply Current	LMV331-N		40	100	µA
		LMV393-N Both Comparators		70	140	µA
		LMV339-N All four Comparators		140	200	µA
	Output Leakage Current			.003		µA
	Output Leakage Current	At the temperature extremes			1	µA

(1) All limits are ensured by testing or statistical analysis.

(2) Typical values represent the most likely parametric norm as determined at the time of characterization. Actual typical values may vary over time and will also depend on the application and configuration. The typical values are not tested and are not ensured on shipped production material.

6.6 2.7-V AC Electrical Characteristics

T_J = 25°C, V⁺ = 2.7 V, R_L = 5.1 kΩ, V⁻ = 0 V.

	PARAMETER	TEST CONDITIONS	TYP ⁽²⁾	UNIT
t_PHL	Propagation Delay (High to Low)	Input Overdrive = 10 mV	1000	ns
t_PHL	Propagation Delay (High to Low)	Input Overdrive = 100 mV	350	ns
t_PLH	Propagation Delay (Low to High)	Input Overdrive = 10 mV	500	ns
t_PLH	Propagation Delay (Low to High)	Input Overdrive = 100 mV	400	ns

(1) All limits are ensured by testing or statistical analysis.

(2) Typical values represent the most likely parametric norm as determined at the time of characterization. Actual typical values may vary over time and will also depend on the application and configuration. The typical values are not tested and are not ensured on shipped production material.

6.7 5-V DC Electrical Characteristics

Unless otherwise specified, all limits ensured for T_J = 25°C, V⁺ = 5 V, V⁻ = 0 V.

	PARAMETER	TEST CONDITIONS	MIN ⁽¹⁾	TYP ⁽²⁾	MAX ⁽¹⁾	UNIT
V_OS	Input Offset Voltage			1.7	7	mV
V_OS	Input Offset Voltage	At the temperature extremes			9	mV
TCV_OS	Input Offset Voltage Average Drift			5		µV/°C
I_B	Input Bias Current			25	250	nA
I_B	Input Bias Current	At the temperature extremes			400	nA
I_OS	Input Offset Current			2	50	nA
I_OS	Input Offset Current	At the temperature extremes			150	nA
V_CM	Input Voltage Range			−0.1		V
V_CM	Input Voltage Range			4.2		V
A_V	Voltage Gain		20	50		V/mV
V_sat	Saturation Voltage	I_SINK ≤ 4 mA		200	400	mV
V_sat	Saturation Voltage	At the temperature extremes			700	mV
I_O	Output Sink Current	V_O ≤ 1.5V		84	10	mA
I_S	Supply Current	LMV331-N		60	120	µA
		At the temperature extremes			150	µA
		LMV393-N Both Comparators		100	200	µA
		At the temperature extremes			250	µA
		LMV339-N All four Comparators		170	300	µA
		At the temperature extremes			350	µA
	Output Leakage Current			.003		µA
	Output Leakage Current	At the temperature extremes			1	µA

(1) All limits are ensured by testing or statistical analysis.

(2) Typical values represent the most likely parametric norm as determined at the time of characterization. Actual typical values may vary over time and will also depend on the application and configuration. The typical values are not tested and are not ensured on shipped production material.

6.8 5-V AC Electrical Characteristics

T_J = 25°C, V⁺ = 5 V, R_L = 5.1 kΩ, V⁻ = 0 V.

	PARAMETER	TEST CONDITIONS	TYP ⁽²⁾	UNIT
t_PHL	Propagation Delay (High to Low)	Input Overdrive = 10 mV	600	ns
t_PHL	Propagation Delay (High to Low)	Input Overdrive = 100 mV	200	ns
t_PLH	Propagation Delay (Low to High)	Input Overdrive = 10 mV	450	ns
t_PLH	Propagation Delay (Low to High)	Input Overdrive = 100 mV	300	ns

(1) All limits are ensured by testing or statistical analysis.

(2) Typical values represent the most likely parametric norm as determined at the time of characterization. Actual typical values may vary over time and will also depend on the application and configuration. The typical values are not tested and are not ensured on shipped production material.