ZHCSCK8G May   2014  – October 2017 LP8860-Q1

PRODUCTION DATA.  

  1. 1 特性
  2. 2 应用
  3. 3 说明
    1.     系统效率
  4. 4 修订历史记录
  5. 5 器件比较表
  6. 6 Pin Configuration and Functions
    1.     Pin Functions
  7. 7 Specifications
    1. 7.1  Absolute Maximum Ratings
    2. 7.2  ESD Ratings
    3. 7.3  Recommended Operating Conditions
    4. 7.4  Thermal Information
    5. 7.5  Electrical Characteristics
    6. 7.6  Current Sinks Electrical Characteristics
    7. 7.7  Boost Converter Characteristics
    8. 7.8  Logic Interface Characteristics
    9. 7.9  VIN Undervoltage Protection (VIN_UVLO)
    10. 7.10 VDD Undervoltage Protection (VDD_UVLO)
    11. 7.11 VIN Overvoltage Protection (VIN_OVP)
    12. 7.12 VIN Overcurrent Protection (VIN_OCP)
    13. 7.13 Power-Line FET Control Electrical Characteristics
    14. 7.14 External Temp Sensor Control Electrical Characteristics
    15. 7.15 I2C Serial Bus Timing Parameters (SDA, SCLK)
    16. 7.16 SPI Timing Requirements
    17. 7.17 Typical Characteristics
  8. 8 Detailed Description
    1. 8.1 Overview
      1. 8.1.1 Boost Controller
      2. 8.1.2 LED Output Configurations
      3. 8.1.3 Display Mode
      4. 8.1.4 Cluster Mode
      5. 8.1.5 Hybrid Dimming
      6. 8.1.6 Charge Pump and Square Waveform (SQW) Output
      7. 8.1.7 Power-Line FET
      8. 8.1.8 Protection Features
      9. 8.1.9 Advanced Thermal Protection Features
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1 Clock Generation
        1. 8.3.1.1 LED PWM Clock Generation With VSYNC
        2. 8.3.1.2 LED PWM Frequency and Resolution
      2. 8.3.2 Brightness Control (Display Mode)
        1. 8.3.2.1 PWM Input Duty Cycle Based Control
        2. 8.3.2.2 Brightness Register Control
        3. 8.3.2.3 PWM Input Duty × Brightness Register
        4. 8.3.2.4 PWM-Input Direct Control
        5. 8.3.2.5 Brightness Slope
        6. 8.3.2.6 LED Dimming Methods
        7. 8.3.2.7 PWM Calculation Data Flow for Display Mode
      3. 8.3.3 LED Output Modes and Phase Shift PWM (PSPWM) Scheme
      4. 8.3.4 LED Current Setting
      5. 8.3.5 Cluster Mode
      6. 8.3.6 Boost Controller
      7. 8.3.7 Charge Pump
      8. 8.3.8 Powerline Control FET
      9. 8.3.9 Protection and Fault Detection Modes
        1. 8.3.9.1 LED Fault Comparators and Adaptive Boost Control
        2. 8.3.9.2 LED Current Dimming With Internal Temperature Sensor
        3. 8.3.9.3 LED Current Limitation With External NTC Sensor
        4. 8.3.9.4 LED Current Dimming With External NTC Sensor
        5. 8.3.9.5 Protection Feature and Fault Summary
    4. 8.4 Device Functional Modes
      1. 8.4.1 Standby Mode
      2. 8.4.2 Active Mode
      3. 8.4.3 Fault Recovery State
      4. 8.4.4 Start-Up and Shutdown Sequences
    5. 8.5 Programming
      1. 8.5.1 EEPROM
      2. 8.5.2 Serial Interface
        1. 8.5.2.1 SPI Interface
        2. 8.5.2.2 I2C Serial Bus Interface
          1. 8.5.2.2.1 Interface Bus Overview
          2. 8.5.2.2.2 Data Transactions
          3. 8.5.2.2.3 Acknowledge Cycle
          4. 8.5.2.2.4 Acknowledge After Every Byte Rule
          5. 8.5.2.2.5 Addressing Transfer Formats
          6. 8.5.2.2.6 Control Register Write Cycle
          7. 8.5.2.2.7 Control Register Read Cycle
    6. 8.6 Register Maps
      1. 8.6.1 Register Bit Explanations
        1. 8.6.1.1  Display/Cluster1 Brightness Control MSB
        2. 8.6.1.2  Display/Cluster1 Brightness Control LSB
        3. 8.6.1.3  Display/Cluster1 Output Current MSB
        4. 8.6.1.4  Display/Cluster1 Output Current LSB
        5. 8.6.1.5  Cluster2 Brightness Control MSB
        6. 8.6.1.6  Cluster2 Brightness Control LSB
        7. 8.6.1.7  Cluster2 Output Current
        8. 8.6.1.8  Cluster3 Brightness Control MSB
        9. 8.6.1.9  Cluster3 Brightness Control LSB
        10. 8.6.1.10 Cluster3 Output Current
        11. 8.6.1.11 Cluster4 Brightness Control MSB
        12. 8.6.1.12 Cluster4 Brightness Control LSB
        13. 8.6.1.13 Cluster4 Output Current
        14. 8.6.1.14 Configuration
        15. 8.6.1.15 Status
        16. 8.6.1.16 Fault
        17. 8.6.1.17 LED Fault
        18. 8.6.1.18 Fault Clear
        19. 8.6.1.19 Identification
        20. 8.6.1.20 Temp MSB
        21. 8.6.1.21 Temp LSB
        22. 8.6.1.22 Display LED Current MSB
        23. 8.6.1.23 Display LED Current LSB
        24. 8.6.1.24 Display LED PWM MSB
        25. 8.6.1.25 Display LED PWM LSB
        26. 8.6.1.26 EEPROM Control
        27. 8.6.1.27 EEPROM Unlock Code
      2. 8.6.2 EEPROM Bit Explanations
        1. 8.6.2.1  EEPROM Register 0
        2. 8.6.2.2  EEPROM Register 1
        3. 8.6.2.3  EEPROM Register 2
        4. 8.6.2.4  EEPROM Register 3
        5. 8.6.2.5  EEPROM Register 4
        6. 8.6.2.6  EEPROM Register 5
        7. 8.6.2.7  EEPROM Register 6
        8. 8.6.2.8  EEPROM Register 7
        9. 8.6.2.9  EEPROM Register 8
        10. 8.6.2.10 EEPROM Register 9
        11. 8.6.2.11 EEPROM Register 10
        12. 8.6.2.12 EEPROM Register 11
        13. 8.6.2.13 EEPROM Register 12
        14. 8.6.2.14 EEPROM Register 13
        15. 8.6.2.15 EEPROM Register 14
        16. 8.6.2.16 EEPROM Register 15
        17. 8.6.2.17 EEPROM Register 16
        18. 8.6.2.18 EEPROM Register 17
        19. 8.6.2.19 EEPROM Register 18
        20. 8.6.2.20 EEPROM Register 19
        21. 8.6.2.21 EEPROM Register 20
        22. 8.6.2.22 EEPROM Register 21
        23. 8.6.2.23 EEPROM Register 22
        24. 8.6.2.24 EEPROM Register 23
        25. 8.6.2.25 EEPROM Register 24
  9. 9 Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Applications
      1. 9.2.1 Typical Application for Display Backlight
        1. 9.2.1.1 Design Requirements
        2. 9.2.1.2 Detailed Design Procedure
          1. 9.2.1.2.1  Inductor Selection
          2. 9.2.1.2.2  Output Capacitor Selection
          3. 9.2.1.2.3  Input Capacitor Selection
          4. 9.2.1.2.4  Charge Pump Output Capacitor
          5. 9.2.1.2.5  Charge Pump Flying Capacitor
          6. 9.2.1.2.6  Diode
          7. 9.2.1.2.7  Boost Converter Transistor
          8. 9.2.1.2.8  Boost Sense Resistor
          9. 9.2.1.2.9  Power Line Transistor
          10. 9.2.1.2.10 Input Current Sense Resistor
          11. 9.2.1.2.11 Filter Component Values
            1. 9.2.1.2.11.1 Critical Components for Design
        3. 9.2.1.3 Application Performance Plots
      2. 9.2.2 Low VDD Voltage and Combined Output Mode Application
        1. 9.2.2.1 Design Requirements
        2. 9.2.2.2 Detailed Design Procedure
        3. 9.2.2.3 Application Performance Plots
      3. 9.2.3 High Output Voltage Application
        1. 9.2.3.1 Design Requirements
        2. 9.2.3.2 Detailed Design Procedure
        3. 9.2.3.3 Application Performance Plots
      4. 9.2.4 High Output Current Application
        1. 9.2.4.1 Design Requirements
        2. 9.2.4.2 Detailed Design Procedure
        3. 9.2.4.3 Application Performance Plots
      5. 9.2.5 Three-Channel Configuration Without Serial Interface
        1. 9.2.5.1 Design Requirements
        2. 9.2.5.2 Detailed Design Procedure
        3. 9.2.5.3 Application Performance Plots
      6. 9.2.6 Solution With Minimum External Components
        1. 9.2.6.1 Design Requirements
  10. 10Power Supply Recommendations
  11. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Example
  12. 12器件和文档支持
    1. 12.1 器件支持
      1. 12.1.1 第三方米6体育平台手机版_好二三四免责声明
    2. 12.2 文档支持
      1. 12.2.1 相关文档
    3. 12.3 接收文档更新通知
    4. 12.4 社区资源
    5. 12.5 商标
    6. 12.6 静电放电警告
    7. 12.7 Glossary
  13. 13机械、封装和可订购信息

封装选项

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)
  • VFP|32
散热焊盘机械数据 (封装 | 引脚)
订购信息

7.6 Current Sinks Electrical Characteristics

Limits apply over the full ambient temperature range –40°C ≤ TA ≤ +125°C. Unless otherwise specified: VDD = 3.3 V, VIN = 12 V, EN/VDDIO = 3.3 V, L = 22 μH, CIN = 2 × 10 μF ceramic and 33 μF electrolytic, COUT = 2 × 10 μF ceramic and 33 μF electrolytic, CVDD = 1 μF, CCPUMP = 10 μF, Q = IPD25N06S4L-30-ND, D = SS5P10-M3/86A.
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
ILEAKAGE Leakage current Outputs OUT1 to OUT4, VOUT = 48 V 0.1 1 µA
IMAX Maximum source current OUT1 to OUT4 150 mA
IOUT Output current accuracy IOUT = 150 mA −3% 3%
IMATCH Output current matching(1) IOUT = 150 mA, 100% brightness 0.5% 2%
ƒLED_PWM LED PWM output frequency for display mode PWM_FREQ[3:0] = 0000b
PWM_FREQ[3:0] = 1111b		 4883
39 063		 Hz
ƒPWM PWM input frequency BRT_MODE[1:0] = 00, 01 and 10 100 500 Hz
tPWM MIN Minimum on and off time for PWM input 400 ns
IDIM Dimming ratio (input resolution) External 100 Hz PWM 13 000:1
SPI or I2C control 16 bit
PWMRES PWM output resolution, PWM control for BRT_MODE[1:0] = 00, 01, and 10 (without dithering) ƒLED_PWM = 5 kHz, ƒOSC = 5 MHz 10 bits
ƒLED_PWM= 10 kHz, ƒOSC = 5 MHz 9
ƒLED_PWM = 20 kHz, ƒOSC = 5 MHz 8
ƒLED_PWM = 40 kHz, ƒOSC = 5 MHz 7
ƒLED_PWM = 5 kHz, ƒOSC = 40 MHz 13
ƒLED_PWM = 10 kHz, ƒOSC = 40 MHz 12
ƒLED_PWM = 20 kHz, ƒOSC = 40 MHz 11
ƒLED_PWM = 40 kHz, ƒOSC = 40 MHz 10
ΔIOUT Individual output current adjustment range DRV_OUTx_CORR[3:0] = 1111 –7.4%
DRV_OUTx_CORR[3:0] = 0000 6.5%
VSAT Saturation voltage(2) IOUT = 150 mA 0.5 0.75 V
VSHORT_FAULT_THR LED short detection threshold DRV_LED_FAULT_THR[1:0] = 00 3.6 V
DRV_LED_FAULT_THR[1:0] = 01 3.6
DRV_LED_FAULT_THR[1:0] = 10 6.9
DRV_LED_FAULT_THR[1:0] = 11 10.6
(1) Output Current Accuracy is the difference between the actual value of the output current and programmed value of this current. Matching is the maximum difference from the average. For the constant current sinks on the part (OUT1 to OUT4), the following are determined: the maximum output current (MAX), the minimum output current (MIN), and the average output current of all outputs (AVG). Two matching numbers are calculated: (MAX-AVG)/AVG and (AVG-MIN)/AVG. The largest number of the two (worst case) is considered the matching figure. The typical specification provided is the most likely norm of the matching figure for all parts. Note that some manufacturers have different definitions in use.
(2) Saturation voltage is defined as the voltage when the LED current has dropped 10% from the value measured at 1 V.
千亿体育app官网登录(中国)官方网站IOS/安卓通用版/手机APP | 米乐app下载官网（中国）|ios|Android/通用版APP最新版 | 米乐|米乐·M6（中国大陆）官方网站 | 千亿体育登陆地址 | 华体会体育（中国）HTH·官方网站 | 千赢qy国际_全站最新版千赢qy国际V6.2.14安卓/IOS下载 | 18新利网v1.2.5|中国官方网站 | bob电竞真人（中国官网）安卓/ios苹果/电脑版【1.97.95版下载】 | 千亿体育app官方下载(中国)官方网站IOS/安卓/手机APP下载安装 |