ZHCSI50B may 2018 – may 2023 LSF0102-Q1
PRODUCTION DATA
- 1
- 1 特性
- 2 应用
- 3 说明
- 4 Revision History
- 5 Pin Configuration and Functions
-
6 Specifications
- 6.1 Absolute Maximum Ratings
- 6.2 ESD Ratings
- 6.3 Recommended Operating Conditions
- 6.4 Thermal Information
- 6.5 Electrical Characteristics
- 6.6 Switching Characteristics (Translating Down): VCCB = 3.3 V
- 6.7 Switching Characteristics (Translating Down): VCCB = 2.5 V
- 6.8 Switching Characteristics Translating Up): VCCB = 3.3 V
- 6.9 Switching Characteristics (Translating Up): VCCB = 2.5 V
- 6.10 Typical Characteristics
- 7 Parameter Measurement Information
- 8 Detailed Description
- 9 Application and Implementation
- 10Device and Documentation Support
- 11Mechanical, Packaging, and Orderable Information
5 Pin Configuration and Functions
Figure 5-1 LSF0102-Q1 DCU Package,8-Pin VSSOP(Top View)Table 5-1 Pin Functions
| PIN | TYPE(1) | DESCRIPTION | |
|---|---|---|---|
| NAME | NO. | ||
| A1 | 3 | I/O | Input/Output A port for Channel 1 |
| A2 | 4 | I/O | Input/Output A port for Channel 2 |
| B1 | 6 | I/O | Input/Output B port for Channel 1 |
| B2 | 5 | I/O | Input/Output B port for Channel 2 |
| EN | 8 | I | I/O enable input; see Figure 9-1 for typical setup. Should be tied directly to Vref_B to be enabled or pulled LOW to disable all I/O pins. |
| GND | 1 | — | Ground |
| Vref_A | 2 | — | A side reference supply voltage; see Section 9 for setup and supply voltage range. |
| Vref_B | 7 | — | B side reference supply voltage. Must be connected to supply through 200 kΩ; see Section 9 for setup and supply voltage range. |
(1) I = input, O = output