米6体育平台手机版

ZHCSOE0P June 1999 – July 2021 MAX3221

PRODUCTION DATA

封装选项

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)

DB|16
PW|16

散热焊盘机械数据 (封装 | 引脚)

订购信息

6.6 Electrical Characteristics – Driver

over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)⁽³⁾

PARAMETER		TEST CONDITIONS		MIN	TYP⁽¹⁾	MAX	UNIT
V_OH	High-level output voltage	D_OUT at R_L = 3 kΩ to GND,	D_IN = GND	5	5.4		V
V_OL	Low-level output voltage	D_OUT at R_L = 3 kΩ to GND,	D_IN = V_CC	–5	–5.4		V
I_IH	High-level input current	V_I = V_CC			±0.01	±1	μA
I_IL	Low-level input current	V_I at GND			±0.01	±1	μA
I_OS	Short-circuit output current⁽²⁾	V_CC = 3.6 V	V_O = 0 V		±35	±60	mA
I_OS	Short-circuit output current⁽²⁾	V_CC = 5.5 V	V_O = 0 V		±35	±60	mA
r_O	Output resistance	V_CC, V+, and V– = 0 V	V_O = ±2 V	300	10M		Ω
I_off	Output leakage current	FORCEOFF = GND	V_O = ±12 V, V_CC = 3 V to 3.6 V			±25	µA
I_off	Output leakage current	FORCEOFF = GND	V_O = ±12 V, V_CC = 4.5 V to 5.5 V			±25	µA

(1) All typical values are at V_CC = 3.3 V or V_CC = 5 V, and T_A = 25°C.

(2) Short-circuit durations should be controlled to prevent exceeding the device absolute power dissipation ratings, and not more than one output should be shorted at a time.

(3) Test conditions are C1–C4 = 0.1 μF at V_CC = 3.3 V ± 0.3 V; C1 = 0.047 μF, C2–C4 = 0.33 μF at V_CC = 5 V ± 0.5