米6体育平台手机版

ZHCSAU6D November 2012 – September 2018 MSP430F67451 , MSP430F67461 , MSP430F67471 , MSP430F67481 , MSP430F67491 , MSP430F67651 , MSP430F67661 , MSP430F67671 , MSP430F67681 , MSP430F67691 , MSP430F67751 , MSP430F67761 , MSP430F67771 , MSP430F67781 , MSP430F67791

PRODUCTION DATA.

封装选项

机械数据 (封装 | 引脚)

PEU|128
- MPQF058B
PZ|100
- MTQF013A

散热焊盘机械数据 (封装 | 引脚)

PZ|100
- QFND428

订购信息

5.39 eUSCI (SPI Master Mode)

over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)⁽¹⁾

PARAMETER		TEST CONDITIONS	V_CC	MIN	MAX	UNIT
t_STE,LEAD	STE lead time, STE low to clock	UCSTEM = 0, UCMODEx = 01 or 10	2 V, 3 V	150		ns
t_STE,LEAD	STE lead time, STE low to clock	UCSTEM = 1, UCMODEx = 01 or 10	2 V, 3 V	150		ns
t_STE,LAG	STE lag time, Last clock to STE high	UCSTEM = 0, UCMODEx = 01 or 10	2 V, 3 V	200		ns
t_STE,LAG	STE lag time, Last clock to STE high	UCSTEM = 1, UCMODEx = 01 or 10	2 V, 3 V	200		ns
t_STE,ACC	STE access time, STE low to SIMO data out	UCSTEM = 0, UCMODEx = 01 or 10	2 V		50	ns
		UCSTEM = 0, UCMODEx = 01 or 10	3 V		30
		UCSTEM = 1, UCMODEx = 01 or 10	2 V		50
		UCSTEM = 1, UCMODEx = 01 or 10	3 V		30
t_STE,DIS	STE disable time, STE high to SIMO high impedance	UCSTEM = 0, UCMODEx = 01 or 10	2 V		40	ns
		UCSTEM = 0, UCMODEx = 01 or 10	3 V		25
		UCSTEM = 1, UCMODEx = 01 or 10	2 V		40
		UCSTEM = 1, UCMODEx = 01 or 10	3 V		25
t_SU,MI	SOMI input data setup time		2 V	50		ns
t_SU,MI	SOMI input data setup time		3 V	30		ns
t_HD,MI	SOMI input data hold time		2 V	0		ns
t_HD,MI	SOMI input data hold time		3 V	0		ns
t_VALID,MO	SIMO output data valid time⁽²⁾	UCLK edge to SIMO valid, C_L = 20 pF	2 V		9	ns
t_VALID,MO	SIMO output data valid time⁽²⁾	UCLK edge to SIMO valid, C_L = 20 pF	3 V		5	ns
t_HD,MO	SIMO output data hold time⁽³⁾	C_L = 20 pF	2 V	0		ns
t_HD,MO	SIMO output data hold time⁽³⁾	C_L = 20 pF	3 V	0		ns

(1) f_UCxCLK = 1/2t_LO/HI with t_LO/HI = max(t_{VALID,MO(eUSCI)} + t_SU,SI(Slave), t_SU,MI(eUSCI) + t_{VALID,SO(Slave)})
For the slave parameters t_SU,SI(Slave) and t_{VALID,SO(Slave)}, see the SPI parameters of the attached slave.

(2) Specifies the time to drive the next valid data to the SIMO output after the output changing UCLK clock edge. See the timing diagrams in Figure 5-11 and Figure 5-12.

(3) Specifies how long data on the SIMO output is valid after the output changing UCLK clock edge. Negative values indicate that the data on the SIMO output can become invalid before the output changing clock edge observed on UCLK. See the timing diagrams in Figure 5-11 and Figure 5-12.

MSP430F67791 MSP430F67781 MSP430F67771 MSP430F67761 MSP430F67751 MSP430F67691 MSP430F67681 MSP430F67671 MSP430F67661 MSP430F67651 MSP430F67491 MSP430F67481 MSP430F67471 MSP430F67461 MSP430F67451 slas639-eUSCI_master_CKPH0.gif

Figure 5-11 SPI Master Mode, CKPH = 0

Figure 5-12 SPI Master Mode, CKPH = 1