米6体育平台手机版

Table 5-31 eUSCI (SPI Slave Mode)

over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)⁽¹⁾

PARAMETER		TEST CONDITIONS	V_CC	MIN	MAX	UNIT
t_STE,LEAD	STE lead time, STE low to clock		2 V	4		ns
t_STE,LEAD	STE lead time, STE low to clock		3 V	3		ns
t_STE,LAG	STE lag time, Last clock to STE high		2 V	0		ns
t_STE,LAG	STE lag time, Last clock to STE high		3 V	0		ns
t_STE,ACC	STE access time, STE low to SOMI data out		2 V		46	ns
t_STE,ACC	STE access time, STE low to SOMI data out		3 V		24	ns
t_STE,DIS	STE disable time, STE high to SOMI high impedance		2 V		38	ns
t_STE,DIS	STE disable time, STE high to SOMI high impedance		3 V		25	ns
t_SU,SI	SIMO input data setup time		2 V	2		ns
t_SU,SI	SIMO input data setup time		3 V	1		ns
t_HD,SI	SIMO input data hold time		2 V	2		ns
t_HD,SI	SIMO input data hold time		3 V	2		ns
t_VALID,SO	SOMI output data valid time⁽²⁾	UCLK edge to SOMI valid, C_L = 20 pF	2 V		55	ns
t_VALID,SO	SOMI output data valid time⁽²⁾	UCLK edge to SOMI valid, C_L = 20 pF	3 V		32	ns
t_HD,SO	SOMI output data hold time⁽³⁾	C_L = 20 pF	2 V	24		ns
t_HD,SO	SOMI output data hold time⁽³⁾	C_L = 20 pF	3 V	16		ns

(1) f_UCxCLK = 1/2t_LO/HI with t_LO/HI ≥ max(t_{VALID,MO(Master)} + t_SU,SI(eUSCI), t_{SU,MI(Master)} + t_{VALID,SO(eUSCI)})
For the master parameters t_{SU,MI(Master)} and t_{VALID,MO(Master)}, see the SPI parameters of the attached master.

(2) Specifies the time to drive the next valid data to the SOMI output after the output changing UCLK clock edge. See the timing diagrams in Figure 5-13 and Figure 5-14.

(3) Specifies how long data on the SOMI output is valid after the output changing UCLK clock edge. See the timing diagrams in Figure 5-13 and Figure 5-14.

MSP430F67791A MSP430F67781A MSP430F67771A MSP430F67761A MSP430F67751A MSP430F67691A MSP430F67681A MSP430F67671A MSP430F67661A MSP430F67651A MSP430F67491A MSP430F67481A MSP430F67471A MSP430F67461A MSP430F67451A slas639-eUSCI_slave_CKPH0.gif

Figure 5-13 SPI Slave Mode, CKPH = 0

Figure 5-14 SPI Slave Mode, CKPH = 1

Table 5-32 lists the characteristics of the eUSCI in I²C mode.

封装选项

机械数据 (封装 | 引脚)

散热焊盘机械数据 (封装 | 引脚)

订购信息

Table 5-31 eUSCI (SPI Slave Mode)