米6体育平台手机版

ZHCSDO6B May 2015 – September 2020 MSP430FG6425 , MSP430FG6426 , MSP430FG6625 , MSP430FG6626

PRODUCTION DATA

封装选项

机械数据 (封装 | 引脚)

PZ|100
- MTQF013A

散热焊盘机械数据 (封装 | 引脚)

PZ|100
- QFND428

订购信息

8.5 Low-Power Mode Supply Currents (Into V_CC) Excluding External Current

over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)⁽¹⁾ ⁽²⁾

PARAMETER		V_CC	PMMCOREV	TEMPERATURE (T_A)								UNIT
				–40°C		25°C		60°C		85°C
				TYP	MAX	TYP	MAX	TYP	MAX	TYP	MAX
I_LPM0,1MHz	Low-power mode 0⁽³⁾ ⁽⁹⁾	2.2 V	0	72		77	87	81		87	98	µA
I_LPM0,1MHz	Low-power mode 0⁽³⁾ ⁽⁹⁾	3 V	3	86		92	105	97		104	117	µA
I_LPM2	Low-power mode 2⁽⁴⁾ ⁽⁹⁾	2.2 V	0	6.9		7.5	9.9	8.5		12	17	µA
I_LPM2	Low-power mode 2⁽⁴⁾ ⁽⁹⁾	3 V	3	7.9		8.5	11	9.7		14	20	µA
I_LPM3,XT1LF	Low-power mode 3, crystal mode⁽⁵⁾ ⁽⁹⁾	2.2 V	0	2.8		3.2	3.7	4.2		7.6	13.5	µA
			1	3.1		3.6		4.6		8.2
			2	3.5		4.0		5.1		8.8
		3 V	0	3.0		3.4	4.0	4.4		7.9	14
			1	3.3		3.8		4.9		8.5
			2	3.7		4.2		5.3		9.0
			3	3.7		4.2	4.8	5.3		9.1	16
I_{LPM3, VLO,WDT}	Low-power mode 3, VLO mode, Watchdog enabled⁽⁶⁾ ⁽⁹⁾	3 V	0	1.2		1.5	2.1	2.4		5.8	12.5	µA
			1	1.4		1.6		2.6		6.1
			2	1.6		1.8		2.8		6.5
			3	1.6		1.8	2.6	2.9		6.5	14
I_LPM4	Low-power mode 4⁽⁷⁾ ⁽⁹⁾	3 V	0	0.6		0.9	1.8	1.9		5.4	11.5	µA
			1	0.7		1.0		2.0		5.6
			2	0.8		1.1		2.2		5.9
			3	0.8		1.1	2.1	2.2		6.0	13
I_{LPM3.5, RTC,VCC}	Low-power mode 3.5 (LPM3.5) current with active RTC into primary supply pin DV_CC ⁽¹⁰⁾	3 V				0.2				0.7	1.7	µA
I_{LPM3.5, RTC,VBAT}	Low-power mode 3.5 (LPM3.5) current with active RTC into backup supply pin VBAT⁽¹¹⁾	3 V				0.7				0.9	1.2	µA
I_{LPM3.5, RTC,TOT}	Total low-power mode 3.5 (LPM3.5) current with active RTC⁽¹²⁾	3 V		0.8		0.9		1.0		1.6	2.9	µA
I_LPM4.5	Low-power mode 4.5 (LPM4.5)⁽⁸⁾	3 V		0.12		0.2	0.6	0.32		0.8	1.9	µA

(1) All inputs are tied to 0 V or to V_CC. Outputs do not source or sink any current.

(2) The currents are characterized with a Micro Crystal CC4V-T1A SMD crystal with a load capacitance of 9 pF. The internal and external load capacitance are chosen to closely match the required 9 pF.

(3) Current for watchdog timer clocked by SMCLK included. ACLK = low-frequency crystal operation (XTS = 0, XT1DRIVEx = 0).
CPUOFF = 1, SCG0 = 0, SCG1 = 0, OSCOFF = 0 (LPM0), f_ACLK = 32768 Hz, f_MCLK = 0 MHz, f_SMCLK = f_DCO = 1 MHz
FG6626 and FG6625 USB disabled (VUSBEN = 0, SLDOEN = 0). FG6426 and FG6425 LDO disabled (LDOEN = 0).

(4) Current for watchdog timer clocked by ACLK and RTC clocked by LFXT1 (32768 Hz) included. ACLK = low-frequency crystal operation (XTS = 0, XT1DRIVEx = 0).
CPUOFF = 1, SCG0 = 0, SCG1 = 1, OSCOFF = 0 (LPM2), f_ACLK = 32768 Hz, f_MCLK = 0 MHz, f_SMCLK = f_DCO = 0 MHz; DCO setting = 1 MHz operation, DCO bias generator enabled.
FG6626 and FG6625 USB disabled (VUSBEN = 0, SLDOEN = 0). FG6426 and FG6425 LDO disabled (LDOEN = 0).

(5) Current for watchdog timer clocked by ACLK and RTC clocked by LFXT1 (32768 Hz) included. ACLK = low-frequency crystal operation (XTS = 0, XT1DRIVEx = 0).
CPUOFF = 1, SCG0 = 1, SCG1 = 1, OSCOFF = 0 (LPM3), f_ACLK = 32768 Hz, f_MCLK = f_SMCLK = f_DCO = 0 MHz
FG6626 and FG6625 USB disabled (VUSBEN = 0, SLDOEN = 0). FG6426 and FG6425 LDO disabled (LDOEN = 0).

(6) Current for watchdog timer clocked by VLO included.
CPUOFF = 1, SCG0 = 1, SCG1 = 1, OSCOFF = 0 (LPM3), f_ACLK = f_MCLK = f_SMCLK = f_DCO = 0 MHz
FG6626 and FG6625 USB disabled (VUSBEN = 0, SLDOEN = 0). FG6426 and FG6425 LDO disabled (LDOEN = 0).

(7) CPUOFF = 1, SCG0 = 1, SCG1 = 1, OSCOFF = 1 (LPM4), f_DCO = f_ACLK = f_MCLK = f_SMCLK = 0 MHz
FG6626 and FG6625 USB disabled (VUSBEN = 0, SLDOEN = 0). FG6426 and FG6425 LDO disabled (LDOEN = 0).

(8) Internal regulator disabled. No data retention.
CPUOFF = 1, SCG0 = 1, SCG1 = 1, OSCOFF = 1, PMMREGOFF = 1 (LPM4.5), f_DCO = f_ACLK = f_MCLK = f_SMCLK = 0 MHz

(9) Current for brownout included. Low-side supervisor and monitors disabled (SVS_L, SVM_L). High-side supervisor and monitor disabled (SVS_H, SVM_H). RAM retention enabled.

(10) V_VBAT = V_CC – 0.2 V, f_DCO = f_MCLK = f_SMCLK = 0 MHz, f_ACLK = 32768 Hz, PMMREGOFF = 1, RTC in backup domain active

(11) V_VBAT = V_CC – 0.2 V, f_DCO = f_MCLK = f_SMCLK = 0 MHz, f_ACLK = 32768 Hz, PMMREGOFF = 1, RTC in backup domain active, no current drawn on VBAK

(12) f_DCO = f_MCLK = f_SMCLK = 0 MHz, f_ACLK = 32768 Hz, PMMREGOFF = 1, RTC in backup domain active, no current drawn on VBAK

封装选项

机械数据 (封装 | 引脚)

散热焊盘机械数据 (封装 | 引脚)

订购信息

8.5 Low-Power Mode Supply Currents (Into VCC) Excluding External Current

8.5 Low-Power Mode Supply Currents (Into V_CC) Excluding External Current