米6体育平台手机版

ZHCSJG5C March 2019 – September 2021 MSP430FR2475 , MSP430FR2476

PRODUCTION DATA

封装选项

机械数据 (封装 | 引脚)

PT|48
- MTQF003C
RHB|32
- MPQF130D
RHA|40
- MPQF135D

散热焊盘机械数据 (封装 | 引脚)

RHB|32
- QFND029X
RHA|40
- QFND027R

订购信息

8.12.7.4 eUSCI (SPI Master Mode)

over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)⁽¹⁾

PARAMETER		TEST CONDITIONS	V_CC	MIN	MAX	UNIT
t_STE,LEAD	STE lead time, STE active to clock	UCSTEM = 0, UCMODEx = 01 or 10		1		UCxCLK cycles
t_STE,LEAD	STE lead time, STE active to clock	UCSTEM = 1, UCMODEx = 01 or 10		1		UCxCLK cycles
t_STE,LAG	STE lag time, last clock to STE inactive	UCSTEM = 0, UCMODEx = 01 or 10		1		UCxCLK cycles
t_STE,LAG	STE lag time, last clock to STE inactive	UCSTEM = 1, UCMODEx = 01 or 10		1		UCxCLK cycles
t_SU,MI	SOMI input data setup time		2 V	58		ns
t_SU,MI	SOMI input data setup time		3 V	40		ns
t_HD,MI	SOMI input data hold time		2 V	0		ns
t_HD,MI	SOMI input data hold time		3 V	0		ns
t_VALID,MO	SIMO output data valid time⁽²⁾	UCLK edge to SIMO valid, C_L = 20 pF	2 V		20	ns
t_VALID,MO	SIMO output data valid time⁽²⁾	UCLK edge to SIMO valid, C_L = 20 pF	3 V		20	ns
t_HD,MO	SIMO output data hold time⁽³⁾	C_L = 20 pF	2 V	-3		ns
t_HD,MO	SIMO output data hold time⁽³⁾	C_L = 20 pF	3 V	-3		ns

(1) f_UCxCLK = 1/2t_LO/HI with t_LO/HI = max(t_{VALID,MO(eUSCI)} + t_SU,SI(Slave), t_SU,MI(eUSCI) + t_{VALID,SO(Slave)}).
For the slave parameters t_SU,SI(Slave) and t_{VALID,SO(Slave)}, see the SPI parameters of the attached slave.

(2) Specifies the time to drive the next valid data to the SIMO output after the output changing UCLK clock edge. See the timing diagrams in Figure 8-13 and Figure 8-14.

(3) Specifies how long data on the SIMO output is valid after the output changing UCLK clock edge. Negative values indicate that the data on the SIMO output can become invalid before the output changing clock edge observed on UCLK. Refer to the timing diagrams in Figure 8-13 and Figure 8-14.

Figure 8-13 SPI Master Mode, CKPH = 0

Figure 8-14 SPI Master Mode, CKPH = 1