米6体育平台手机版

ZHCSDF6F October 2014 – December 2021 MSP430FR4131 , MSP430FR4132 , MSP430FR4133

PRODUCTION DATA

封装选项

机械数据 (封装 | 引脚)

PM|64
- MTQF008B
DGG|48
- MPDS583
DGG|56
- MPDS570

散热焊盘机械数据 (封装 | 引脚)

订购信息

9.10 Device Descriptors (TLV)

Table 9-26 lists the Device IDs of the MSP430FR413x devices. Table 9-27 lists the contents of the device descriptor tag-length-value (TLV) structure for the MSP430FR413x devices.

Table 9-26 Device IDs

DEVICE	DEVICE ID
DEVICE	1A04h	1A05h
MSP430FR4133	F0h	81h
MSP430FR4132	F1h	81h
MSP430FR4131	F2h	81h

Table 9-27 Device Descriptors

	DESCRIPTION	MSP430FR413x
	DESCRIPTION	ADDRESS	VALUE
Information Block	Info length	1A00h	06h
	CRC length	1A01h	06h
	CRC value⁽²⁾	1A02h	Per unit
	CRC value⁽²⁾	1A03h	Per unit
	Device ID	1A04h	See Table 9-26
	Device ID	1A05h	See Table 9-26
	Hardware revision	1A06h	Per unit
	Firmware revision	1A07h	Per unit
Die Record	Die Record Tag	1A08h	08h
	Die Record length	1A09h	0Ah
	Lot Wafer ID	1A0Ah	Per unit
		1A0Bh	Per unit
		1A0Ch	Per unit
		1A0Dh	Per unit
	Die X position	1A0Eh	Per unit
	Die X position	1A0Fh	Per unit
	Die Y position	1A10h	Per unit
	Die Y position	1A11h	Per unit
	Test Result	1A12h	Per unit
	Test Result	1A13h	Per unit
ADC Calibration	ADC Calibration Tag	1A14h	11h
	ADC Calibration Length	1A15h	08h
	ADC Gain Factor	1A16h	Per unit
	ADC Gain Factor	1A17h	Per unit
	ADC Offset	1A18h	Per unit
	ADC Offset	1A19h	Per unit
	ADC 1.5-V Reference Temperature Sensor 30°C	1A1Ah	Per unit
	ADC 1.5-V Reference Temperature Sensor 30°C	1A1Bh	Per unit
	ADC 1.5-V Reference Temperature Sensor 85°C	1A1Ch	Per unit
	ADC 1.5-V Reference Temperature Sensor 85°C	1A1Dh	Per unit
Reference and DCO Calibration	Calibration Tag	1A1Eh	12h
	Calibration Length	1A1Fh	04h
	1.5-V Reference Factor	1A20h	Per unit
	1.5-V Reference Factor	1A21h	Per unit
	DCO Tap Settings for 16 MHz, Temperature 30°C⁽¹⁾	1A22h	Per unit
	DCO Tap Settings for 16 MHz, Temperature 30°C⁽¹⁾	1A23h	Per unit

(1) This value can be directly loaded into DCO bits in CSCTL0 register to get accurate 16-MHz frequency at room temperature, especially when MCU exits from LPM3 and below. It is also suggested to use predivider to decrease the frequency if the temperature drift might result an overshoot beyond 16 MHz.

(2) The CRC value covers the checksum from 1A04h to 1A77h by applying the CRC-CCITT-16 polynomial of x¹⁶ + x¹² + x⁵ + 1.