米6体育平台手机版

ZHCSCG3C May 2014 – December 2017 MSP430FR5720 , MSP430FR5721 , MSP430FR5722 , MSP430FR5723 , MSP430FR5724 , MSP430FR5725 , MSP430FR5726 , MSP430FR5727 , MSP430FR5728 , MSP430FR5729

PRODUCTION DATA.

封装选项

机械数据 (封装 | 引脚)

RGE|24
- MPQF124G
PW|28
- MPDS364

散热焊盘机械数据 (封装 | 引脚)

RGE|24
- QFND024AD

订购信息

5.20 Wake-up Times From Low-Power Modes

over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)

PARAMETER		TEST CONDITIONS	V_CC T_A	MIN	TYP	MAX	UNIT
t_{WAKE-UP LPM0}	Wake-up time from LPM0 to active mode ⁽¹⁾		2 V, 3 V –40°C to 85°C		0.58	1	µs
t_{WAKE-UP LPM12}	Wake-up time from LPM1, LPM2 to active mode ⁽¹⁾		2 V, 3 V –40°C to 85°C		12	25	µs
t_{WAKE-UP LPM34}	Wake-up time from LPM3 or LPM4 to active mode ⁽¹⁾		2 V, 3 V –40°C to 85°C		78	120	µs
t_{WAKE-UP LPMx.5}	Wake-up time from LPM3.5 or LPM4.5 to active mode ⁽¹⁾		2 V, 3 V 0°C to 85°C		310	575	µs
t_{WAKE-UP LPMx.5}	Wake-up time from LPM3.5 or LPM4.5 to active mode ⁽¹⁾		2 V, 3 V –40°C to 85°C		310	1100	µs
t_{WAKE-UP RESET}	Wake-up time from RST to active mode ⁽²⁾	V_CC stable	2 V, 3 V –40°C to 85°C		230	280	µs
t_{WAKE-UP BOR}	Wake-up time from BOR or power-up to active mode	dV_CC/dt = 2400 V/s	2 V, 3 V –40°C to 85°C		1.6		ms
t_RESET	Pulse duration required at RST/NMI terminal to accept a reset event⁽³⁾		2 V, 3 V –40°C to 85°C	4			ns

(1) The wake-up time is measured from the edge of an external wake-up signal (for example, port interrupt or wake-up event) until the first instruction of the user program is executed.

(2) The wake-up time is measured from the rising edge of the RST signal until the first instruction of the user program is executed.

(3) Meeting or exceeding this time makes sures a reset event occurs. Pulses shorter than this minimum time may or may not cause a reset event to occur.