米6体育平台手机版

ZHCSJD6 February 2019 OPA2356-EP

PRODUCTION DATA.

封装选项

机械数据 (封装 | 引脚)

DGK|8
- MPDS028E

散热焊盘机械数据 (封装 | 引脚)

订购信息

6.5 Electrical Characteristics

at T_A = –55°C to 125°C, R_F = 604 Ω, and R_L = 150 Ω connected to V_S / 2 (unless otherwise noted)

PARAMETER			TEST CONDITIONS	MIN	TYP	MAX	UNIT
OFFSET VOLTAGE
V_OS	Input offset voltage		V_S = 5 V		±2	±9	mV
V_OS	Input offset voltage		T_A = –55°C to 125°C			±15	mV
ΔV_OS/ΔT	Offset voltage drift over temperature		T_A = –55°C to 125°C		±7		µV/°C
PSRR	Offset voltage drift vs power supply		V_S = 2.7 V to 5.5 V, V_CM = V_S / 2 – 0.15 V		±80	±350	µV/V
INPUT BIAS CURRENT
I_B	Input bias current				3	±50	pA
I_OS	Input offset current				±1	±50	pA
NOISE
V_n	Input voltage noise density		f = 1 MHz		5.8		nV/√Hz
I_n	Current noise density		f = 1 MHz		50		fA/√Hz
INPUT VOLTAGE RANGE
V_CM	Input common-mode voltage range			(V–) – 0.1		(V+) – 1.5	V
CMRR	Input common-mode rejection ratio		V_S = 5.5 V, –0.1 V < V_CM < 4 V	66	80		dB
CMRR	Input common-mode rejection ratio		T_A = –55°C to 125°C	66			dB
INPUT IMPEDANCE
	Differential input impedance				10¹³ \|\| 1.5		Ω \|\| pF
	Common-mode input impedance				10¹³ \|\| 1.5		Ω \|\| pF
OPEN-LOOP GAIN
	Open-loop gain		V_S = 5 V, 0.4 V < V_O < 4.6 V, T_A = –55°C to 125°C	80			dB
FREQUENCY RESPONSE
f_–3dB	Small-signal bandwidth		G = 1, V_O = 100 mVp-p, R_F = 0 Ω		450		MHz
			G = 2, V_O = 100 mVp-p, R_L = 50 Ω		100
			G = 2, V_O = 100 mVp-p, R_L = 150 Ω		170
			G = 2, V_O = 100 mVp-p, R_L = 1 kΩ		200
GBW	Gain-bandwidth product		G = 10, R_L = 1 kΩ		200		MHz
f_0.1dB	Bandwidth for 0.1-dB gain flatness		G = 2, V_O = 100 mVp-p, R_F = 560 Ω		75		MHz
SR	Slew rate		V_S = 5 V, G = 2, 4-V output step		300		V/µs
SR	Slew rate		V_S = 5 V, G = 2, 4-V output step		–360		V/µs
	Rise and fall times		G = 2, V_O = 200 mVp-p, 10% to 90%		2.4		ns
	Rise and fall times		G = 2, V_O = 2 Vp-p, 10% to 90%		8		ns
	Settling time	0.1%	V_S = 5 V, G = 2, 2-V output step		30		ns
	Settling time	0.01%	V_S = 5 V, G = 2, 2-V output step		120		ns
	Overload recovery time		V_IN × Gain = V_S		8		ns
	Harmonic distortion	Second harmonic	G = 2, f = 1 MHz, V_O = 2 Vp-p, R_L = 200 Ω		–81		dBc
	Harmonic distortion	Third harmonic	G = 2, f = 1 MHz, V_O = 2 Vp-p, R_L = 200 Ω		–93		dBc
	Differential gain error		NTSC, R_L = 150 Ω		0.02%
	Differential phase error		NTSC, R_L = 150 Ω		0.05		°
	Channel-to-channel crosstalk		f = 5 MHz		–90		dB
OUTPUT
	Voltage output swing from rail		V_S = 5 V, R_L = 150 Ω, A_OL > 84 dB		0.2	0.3	V
			V_S = 5 V, R_L = 1 kΩ		0.1
			I_O = ±100 mA		0.8	1
I_O	Continuous output current⁽¹⁾			±60			mA
I_O	Peak output current⁽¹⁾		V_S = 5 V	±100			mA
I_O	Peak output current⁽¹⁾		V_S = 3 V		±80		mA
	Short-circuit current				250		mA
	Short-circuit current				–200		mA
	Closed-loop output impedance				0.02		Ω
POWER SUPPLY
I_Q	Quiescent current (per amplifier)		V_S = 5 V, I_O = 0 V		8.3	11	mA
I_Q	Quiescent current (per amplifier)		T_A = –55°C to 125°C			14	mA
THERMAL SHUTDOWN
	Junction temperature		Shutdown		160		°C
	Junction temperature		Reset from shutdown		140		°C

(1) See Figure 20.