ZHCSJA0F June 2010 – March 2023 OPA140 , OPA2140 , OPA4140
PRODUCTION DATA
PARAMETER | TEST CONDITIONS | MIN | TYP | MAX | UNIT | ||
---|---|---|---|---|---|---|---|
OFFSET VOLTAGE | |||||||
VOS | Input offset voltage | ±30 | ±120 | μV | |||
VS = ±18 V, TA = –40°C to +125°C | ±220 | ||||||
VS = ±2.25 V to ±18 V, TA = –40°C to +125°C | ±4 | μV/V | |||||
dVOS/dT | Input offset voltage drift | VS = ±18 V, TA = –40°C to +125°C | ±0.35 | ±1 | μV/°C | ||
PSRR | Power-supply rejection ratio | VS = ±2.25 V to ±18 V, TA = –40°C to +125°C | ±0.1 | ±0.5 | μV/V | ||
INPUT BIAS CURRENT | |||||||
IB | Input bias current | ±0.5 | ±10 | pA | |||
TA = –40°C to +125°C | ±3 | nA | |||||
IOS | Input offset current | ±0.5 | ±10 | pA | |||
TA = –40°C to +125°C | ±1 | nA | |||||
NOISE | |||||||
En | Input voltage noise | f = 0.1 Hz to 10 Hz | 250 | nVPP | |||
f = 0.1 Hz to 10 Hz | 42 | nVRMS | |||||
en | Input voltage noise density | f = 10 Hz | 8 | nV/√Hz | |||
f = 100 Hz | 5.8 | ||||||
f = 1 kHz | 5.1 | ||||||
In | Input current noise density | f = 1 kHz | 0.8 | fA/√Hz | |||
INPUT VOLTAGE RANGE | |||||||
VCM | Common-mode voltage | TA = –40°C to +125°C | (V–) – 0.1 | (V+) – 3.5 | V | ||
CMRR | Common-mode rejection ratio | VS = ±18 V, VCM = (V–) – 0.1 V to (V+) – 3.5 V | 126 | 140 | dB | ||
TA = –40°C to +125°C |
120 | ||||||
INPUT IMPEDANCE | |||||||
ZID | Differential | 1013 || 10 | Ω || pF | ||||
ZIC | Common-mode | VCM = (V–) –0.1 V to (V+) –3.5 V | 1013 || 7 | Ω || pF | |||
OPEN-LOOP GAIN | |||||||
AOL | Open-loop voltage gain | VO = (V–) + 0.35 V to (V+) – 0.35 V, RL = 10 kΩ | 120 | 126 | dB | ||
VO = (V–) + 0.35 V to (V+) – 0.35 V, RL = 2 kΩ |
114 | 126 | |||||
TA = –40°C to +125°C | 108 | ||||||
FREQUENCY RESPONSE | |||||||
BW | Gain bandwidth product | 11 | MHz | ||||
SR | Slew rate | 20 | V/μs | ||||
ts | Settling time | 12 bits | 0.88 | μs | |||
16 bits | 1.6 | ||||||
tOR | Overload recovery time | 600 | ns | ||||
THD+N | Total harmonic distortion + noise | 1 kHz, G = +1, VO = 3.5 VRMS | 0.00005% | ||||
OUTPUT | |||||||
VO | Voltage output | RL = 10 kΩ, AOL ≥ 108 dB | (V–) + 0.2 | (V+) – 0.2 | V | ||
RL = 2 kΩ, AOL ≥ 108 dB | (V–) + 0.35 | (V+) – 0.35 | |||||
ISC | Short-circuit current | Source | 36 | mA | |||
Sink | –30 | ||||||
CLOAD | Capacitive load drive | See Typical Characteristics | |||||
ZO | Open-loop output impedance | f = 1 MHz, IO = 0 A (See Typical Characteristics) | 16 | Ω | |||
POWER SUPPLY | |||||||
IQ | Quiescent current per amplifier | IO = 0 mA | 1.8 | 2 | mA | ||
TA = –40°C to +125°C | 2.7 | ||||||
CHANNEL SEPARATION | |||||||
Channel separation | At dc | 0.02 | µV/V | ||||
At 100 kHz | 10 |