ZHCSFU2A December 2016 – January 2019 OPA4277-SP
PRODUCTION DATA.
| PARAMETER | TEST CONDITIONS | MIN | TYP | MAX | UNIT | |
|---|---|---|---|---|---|---|
| OFFSET VOLTAGE | ||||||
| VOS | Input offset voltage | TJ = 25°C, pre- and post-irradiated | ±20 | ±65 | µV | |
| TJ = –55°C to 125°C, pre-irradiated | ±140 | |||||
| dVOS/dT | Input offset voltage temperature drift | TJ = –55°C to 125°C, pre-irradiated | ±0.15 | µV/°C | ||
| PSRR | Input offset voltage | vs time | 0.2 | µV/mo | ||
| vs power supply,
VS = ±2 V to ±18 V, TJ = 25°C, pre- and post-irradiated |
±0.3 | ±1 | µV/V | |||
| VS = ±2 V to ±18 V,
TJ = –55°C to 125°C |
±1 | |||||
| Channel separation | dc | 0.1 | µV/V | |||
| INPUT BIAS CURRENT | ||||||
| IB | Input bias current | TJ = –55°C to 125°C | ±17.5 | nA | ||
| TJ = 25°C, pre- and post-irradiated | ±17.5 | |||||
| IOS | Input offset current | TJ = –55°C to 125°C | ±17.5 | nA | ||
| TJ = 25°C, pre- and post-irradiated | ±17.5 | |||||
| NOISE | ||||||
| Input voltage noise | ƒ = 0.1 to 10 Hz | 0.22 | µVpp | |||
| Input voltage noise density | ƒ = 10 Hz | 12 | nV/√Hz | |||
| ƒ = 100 Hz | 8 | |||||
| ƒ = 1 kHz | 8 | |||||
| ƒ = 10 kHz | 8 | |||||
| in | Input noise current density | ƒ = 1 kHz | 0.2 | fA/√Hz | ||
| INPUT VOLTAGE | ||||||
| VCM | Common-mode voltage range | TJ = 25°C, pre- and post-irradiated | (V–) + 2 | (V+) – 2 | V | |
| CMRR | Common-mode rejection ratio | (V–) + 2 V < VCM < (V+) – 2 V,
TJ = 25°C, post-irradiated |
114 | 140 | dB | |
| (V–) + 2 V < VCM < (V+) – 2 V,
TJ = –55°C to 125°C |
114 | |||||
| INPUT IMPEDANCE | ||||||
| Differential | 100 || 3 | MΩ || pF | ||||
| Common mode | (V–) + 2 V < VCM < (V+) – 2 V | 250 || 3 | GΩ || pF | |||
| OPEN-LOOP GAIN | ||||||
| AOL | Open-loop voltage gain | VO = (VO–) + 0.5 V to (VO+) – 1.2 V,
RL = 10 kΩ |
140 | dB | ||
| VO = (VO–) + 1.5 V to (VO+) – 1.5 V,
RL = 2 kΩ, TJ = –55°C to 125°C |
118 | 134 | ||||
| VO = (VO–) + 1.5 V to (VO+) – 1.5 V,
RL = 2 kΩ, TJ = 25°C, pre- and post-irradiated |
118 | 134 | ||||
| VO = (VO–) + 3.4 V to (VO+) – 3.4 V,
RL = 600 Ω, VS = ±7 V, TJ = –55°C to 125°C |
118 | 134 | ||||
| VO = (VO–) + 3.4 V to (VO+) – 3.4 V,
RL = 600 Ω, VS = ±7 V, TJ = 25°C, pre- and post-irradiated |
118 | 134 | ||||
| FREQUENCY RESPONSE | ||||||
| GBW | Gain-bandwidth product | 1 | MHz | |||
| SR | Slew rate | 0.8 | V/µs | |||
| Settling time | 0.1%, 10-V step, VS = ±15 V, G = 1 | 14 | µs | |||
| 0.01%, 10-V step, VS = ±15 V, G = 1 | 16 | |||||
| THD + N | Total harmonic distortion + noise | 1 kHz, G = 1, VO = 3.5 Vrms | 0.002% | |||
| OUTPUT | ||||||
| VO | Output voltage | RL = 10 kΩ, TJ = 25°C,
pre- and post-irradiated |
(V–) + 0.5 | (V+) – 1.2 | V | |
| RL = 10 kΩ, TJ = –55°C to 125°C | (V–) + 0.5 | (V+) – 1.2 | ||||
| RL = 2 kΩ, TJ = 25°C,
pre- and post-irradiated |
(V–) + 1.5 | (V+) – 1.5 | ||||
| RL = 2 kΩ, TJ = –55°C to 125°C | (V–) + 1.5 | (V+) – 1.5 | ||||
| TJ = 25°C, RL = 600 Ω,
pre- and post-irradiated |
(V–) + 3.4 | (V+) – 3.4 | ||||
| RL = 600 Ω, VS = ±7 V,
TJ = –55°C to 125°C |
(V–) + 3.4 | (V+) – 3.4 | ||||
| ISC | Short-circuit current | ±35 | mA | |||
| CLOAD | Capacitive load drive | ƒ = 350 kHz, IO = 0 | See Typical Characteristics | |||
| POWER SUPPLY | ||||||
| VS | Specified voltage | TJ = –55°C to 125°C | ±5 | ±7 | ±15 | V |
| TJ = 25°C, pre- and post-irradiated | ±5 | ±7 | ±15 | |||
| VS | Operating voltage | TJ = –55°C to 125°C | ±2 | ±7 | ±18 | V |
| TJ = 25°C, pre- and post-irradiated | ±2 | ±7 | ±18 | |||
| IQ | Quiescent current per amplifier | IO = 0, TJ = 25°C,
pre- and post-irradiated |
±790 | ±850 | µA | |
| IO = 0, TJ = –55°C to 125°C | ±900 | |||||