米6体育平台手机版

ZHCSI51A May 2018 – June 2018 OPA521

PRODUCTION DATA.

At T_CASE = 25°C, V+ = 15 V, IN+ = (V+) / 2, R_LOAD = 50 Ω unless otherwise noted.

PARAMETER			TEST CONDITIONS	MIN	TYP	MAX	UNIT
NOISE
	Integrated output noise	CEN-A	35 kHz to 95 kHz		45		µV_RMS
		CEN-B	95 kHz to 125 kHz		32		µV_RMS
		CEN-C	125 kHz to 140 kHz		23		µV_RMS
		CEN-D	140 kHz to 148 kHz		16.5		µV_RMS
		ARIB STD-T84	35 kHz to 420 kHz		114		µV_RMS
		FCC-LOW	35 kHz to 125 kHz		55		µV_RMS
		G3-FCC	150 kHz to 490 kHz		107		µV_RMS
INPUT
	Input voltage range, IN-		For linear operation, +IN = V+/2	(GND + 0.4)/7		(V+ – 0.4)/7	V
	Input impedance				18		kΩ
FREQUENCY RESPONSE
BW	Bandwidth		I_LOAD = 0 mA		3.82		MHz
SR	Slew rate		V+ = 24 V, V_OUT = 20-V step		75		V/µs
	Full-power bandwidth		V+ = 24 V, V_OUT = 15 V_PP		800		kHz
PSRR	Power-supply rejection ratio		RTI, DC	80	94		dB
PSRR	Power-supply rejection ratio		RTI, DC to f = 50 kHz	See Typical Curves			dB
OUTPUT
V_O	Voltage output swing	From V+	I_O = 200-mA sourcing, 1-ms pulse			0.5	V
		From V+	I_O = 1.5-A sourcing, 1-ms pulse			2.25	V
		From GND	I_O = 200 mA sinking, 1-ms pulse			0.5	V
		From GND	I_O = 1.5-A sinking, 1-ms pulse			1.5	V
	Max continuous current, DC		ILIM (pin 12) connected to ground	See Recommended Operating Conditions			A
	Output resistance		I_O = 1.9 A, f = 500 kHz		0.1		Ω
	Disabled output impedance		f = 100 kHz		145 \|\| 125		kΩ \|\| pF
	Max output current	Resistor-selectable	ILIM (pin 12) connected to ground		2.5		A
GAIN
G	Nominal gain		V_OUT/V_IN		–7		V/V
G_E	Gain error		T_J = -40°C to +125°C	–2%	0.1%	2%
	Gain error drift		T_J = -40°C to +125°C		±5		ppm/°C
THERMAL SHUTDOWN
	Junction temperature at shutdown				140		°C
	Hysteresis				10		°C
	Return to normal operation				130		°C