Over operating free-air temperature range (unless otherwise noted).
|
MIN |
MAX |
UNIT |
| VS |
Supply voltage, VS = (V+) – (V–) |
|
26 |
V |
|
Signal input pins |
Voltage(2) |
(V–) –
0.4 |
(V+) +
0.4 |
V |
| Current
through ESD diodes(2) |
|
±10 |
mA |
| Maximum
differential voltage across inputs(3) |
|
0.5 |
V |
|
Signal output pins |
Voltage |
(V–) –
0.4 |
(V+) +
0.4 |
V |
| Current(4) |
|
±10 |
mA |
|
Output short-circuit(5) |
|
Continuous |
|
| TJ |
Junction temperature |
|
150 |
°C |
| Tstg |
Storage temperature |
–55 |
150 |
°C |
|
Latch-up per JESD78B |
|
Class 1 Level
B |
|
(1) Operation outside the Absolute Maximum Ratings may cause permanent
device damage. Absolute Maximum Ratings do not imply functional operation
of the device at these or any other conditions beyond those listed under
Recommended Operating Conditions. If used outside the Recommended
Operating Conditions but within the Absolute Maximum Ratings, the device
may not be fully functional, and this may affect device reliability,
functionality, performance, and shorten the device lifetime.
(2) Input pins are diode-clamped to the power-supply rails. Current limit signals
that can swing more than 0.4V beyond the supply rails to 10mA or less.
(4) Output pins are diode-clamped to the power-supply rails. Current limit input
signals forcing the output pin more than 0.4V beyond the supply rails to 10mA or
less.