10 Revision History
Changes from Revision G (August 2016) to Revision H (October 2024)
- 更新了整个文档中的表格、图和交叉参考的编号格式Go
- 更新了“特性”Go
- 更新了说明
Go
- 更新了首页图Go
- Updated Device Comparison Table
Go
- Changed designator from DRB to DBV (typo) in Table 5-1, Pin
Functions
Go
- Added Supply turn-on and turn-off rate and continuous input current specifications to Absolute Maximum Ratings tableGo
- Updated footnote on Absolute Maximum Ratings table to add additional clarificationGo
- Changed Junction temperature specification from 175°C to 150°C in Absolute Maximum Ratings tableGo
- Deleted Machine Model (MM) specification from ESD Ratings tableGo
- Updated thermal specifications for DBV package in Thermal Information table Go
- Changed designator from DRB to DBV (typo) in Thermal Information Go
- Added new Electrical Characteristics tables for OPA690IDBV package.Go
- Updated Electrical Characteristics: OPA690IDBV, ±5 V AC Performance section with improved typical small-signal bandwidth, large-signal bandwidth, slew rate, voltage noise, and distortion parametersGo
- Added TA ≅ 25°C and input and output reference voltages to the default test conditions across all Electrical Characteristics sections.Go
- Deleted 0°C to +70°C conditions across all Electrical Characteristics sectionsGo
- Deleted minimum specifications and over temperature specifications across all Electrical Characteristics: AC Performance sectionsGo
- Changed typical Bandwidth for 0.1-dB gain flatness typical value from 30 MHz to 25 MHz in Electrical Characteristics: OPA690IDBV, ±5 VGo
- Changed Peaking at gain of 1 V/V from 4 dB to 1 dB in Electrical Characteristics: OPA690IDBV, ±5 VGo
- Changed typical Large signal bandwidth condition from VO < 0.5 VPP to VO = 2 VPP in Electrical Characteristics: OPA690IDBV, ±5 VGo
- Changed typical rise and fall time at 5 V-step from 2.8 ns to 2.3 ns at 4 V-step in Electrical Characteristics: OPA690IDBV, ±5 VGo
- Changed typical 0.02% settling time from 12 ns to 13 ns Electrical Characteristics: OPA690IDBV, ±5 VGo
- Changed typical 2-nd harmonic distortion at 100 Ω from –68 dBc to –85 dBc in Electrical Characteristics: OPA690IDBV, ±5 VGo
- Changed typical 2-nd harmonic distortion at 500 Ω from –77 dBc to –85 dBc in Electrical Characteristics: OPA690IDBV, ±5 VGo
- Changed typical 3-nd harmonic distortion at 100 Ω from –70 dBc to –75 dBc in Electrical Characteristics: OPA690IDBV, ±5 VGo
- Changed typical 3-nd harmonic distortion at 500 Ω from –81 dBc to –90 dBc in Electrical Characteristics: OPA690IDBV, ±5 VGo
- Changed typical input voltage noise from 5.5 nV/√Hz to 4.6 nV/√Hz in Electrical Characteristics: OPA690IDBV, ±5 VGo
- Changed typical input current noise from 3.1 pA/√Hz to 1.7 pA/√Hz in Electrical Characteristics: OPA690IDBV, ±5 VGo
- Changed typical open-loop voltage gain from 69 dB to 78 dB in Electrical Characteristics: OPA690IDBV, ±5 VGo
- Changed typical input offset voltage from ±1 mV to ±0.3 mV in Electrical Characteristics: OPA690IDBV, ±5 VGo
- Changed typical input bias current from ±3 μA to ±1 μA in Electrical Characteristics: OPA690IDBV, ±5 VGo
- Changed typical input offset current from ±0.1 μA to ±0.05 μA in Electrical Characteristics: OPA690IDBV, ±5 VGo
- Changed typical Common-mode input voltage from ±3.5 V to ±3.85 V in Electrical Characteristics: OPA690IDBV, ±5 VGo
- Changed typical Common-mode rejection ratio from 65 dB to 80 dB in Electrical Characteristics: OPA690IDBV, ±5 VGo
- Changed typical Input impedance differential mode from 190 || 0.6 kΩ || pF to 6 || 0.1 MΩ || pF in Electrical Characteristics: OPA690IDBV, ±5 VGo
- Changed typical Input impedance differential mode from 3.2 || 0.9 MΩ || pF to 38 || 1 MΩ || pF in Electrical Characteristics: OPA690IDBV, ±5 VGo
- Changed minimum Output voltage swing at no load from ±3.8 V to ±3.7 V in Electrical Characteristics: OPA690IDBV, ±5 VGo
- Changed typical Output voltage swing at No load from ±4 V to ±3.9 V in Electrical Characteristics: OPA690IDBV, ±5 VGo
- Changed typical Output voltage swing at 100 Ω load from ±3.9 V to ±3.85 V in Electrical Characteristics: OPA690IDBV, ±5 VGo
- Changed typical Current output sourcing from 190 mA to 215 mA in Electrical Characteristics: OPA690IDBV, ±5 VGo
- Changed typical Current output sinking from –190 mA to –215 mA in Electrical Characteristics: OPA690IDBV, ±5 VGo
- Changed typical Short circuit current limit from ±250 mA to ±240 mA in Electrical Characteristics: OPA690IDBV, ±5 VGo
- Changed typical Closed-loop output impedance from 0.04 Ω to 0.01 Ω in Electrical Characteristics: OPA690IDBV, ±5 VGo
- Corrected the polarity of the power down supply currentGo
- Changed typical disable time from 200 ns to 600 ns in Electrical Characteristics: OPA690IDBV, ±5 VGo
- Changed typical Enable time from 25 ns to 40 ns in Electrical Characteristics: OPA690IDBV, ±5 VGo
- Changed typical output capacitance in disable from 4 pF to 8 pF in Electrical Characteristics: OPA690IDBV, ±5 VGo
- Changed typical Disable voltage from 1.8 V to 2.3 V in Electrical Characteristics: OPA690IDBV, ±5 VGo
- Changed maximum Quiescent current from 5.8 mA to 7 mA in Electrical Characteristics: OPA690IDBV, ±5 VGo
- Changed typical Quiescent current from 5.5 mA to 6.1 mA in Electrical Characteristics: OPA690IDBV, ±5 VGo
- Changed minimum Quiescent current from 5.3 mA to 5.2 mA in Electrical Characteristics: OPA690IDBV, ±5 VGo
- Changed maximum Quiescent current over temperature from 6.6 mA to 7 mA in Electrical Characteristics: OPA690IDBV, ±5 VGo
- Changed typical Power-supply rejection ratio from 75 dB to 86 dB in Electrical Characteristics: OPA690IDBV, ±5 VGo
- Updated the Electrical Characteristics: OPA690IDBV, 5 V AC performance section with improved typical small-signal bandwidth, voltage noise, and distortion parametersGo
- Changed the Peaking at gain of 1 V/V from 5 dB to 1.3 dB in Electrical Characteristics: OPA690IDBV, 5 VGo
- Changed the typical Slew rate from 1000 V/μs to 850 V/μs in Electrical Characteristics: OPA690IDBV, 5 VGo
- Changed the typical 0.02% settling time from 12 ns to 19 ns Electrical Characteristics: OPA690IDBV, 5 VGo
- Changed the typical 0.1% settling time from 8 ns to 16 ns Electrical Characteristics: OPA690IDBV, 5 VGo
- Changed the typical input voltage noise from 5.6 nV/√Hz to 4.6 nV/√Hz in Electrical Characteristics: OPA690IDBV, 5 VGo
- Changed the typical input current noise from 3.2 pA/√Hz to 1.6 pA/√Hz in Electrical Characteristics: OPA690IDBV, 5 VGo
- Changed the typical open-loop voltage gain from 63 dB to 77 dB in Electrical Characteristics: OPA690IDBV, 5 VGo
- Changed the typical input offset voltage from ±1 mV to ±0.3 mV in Electrical Characteristics: OPA690IDBV, 5 VGo
- Changed the typical input bias current from ±3 μA to ±1 μA in Electrical Characteristics: OPA690IDBV, 5 VGo
- Changed the typical input offset current from ±0.3 μA to ±0.05 μA in Electrical Characteristics: OPA690IDBV, 5 VGo
- Changed the typical Most positive input voltage from 3.5 V to 3.85 V in Electrical Characteristics: OPA690IDBV, 5 VGo
- Changed the typical input bias current from ±3 μA to ±1 μA in Electrical Characteristics: OPA690IDBV, 5 VGo
- Changed the typical Common-mode rejection ratio from 63 dB to 79 dB in Electrical Characteristics: OPA690IDBV, 5 VGo
- Changed the typical Input impedance differential mode from 92 || 1.4 kΩ || pF to 6 || 0.1 MΩ || pF in Electrical Characteristics: OPA690IDBV, 5 VGo
- Changed the typical Input impedance common-mode from 2.2 || 1.5 MΩ || pF to 27 || 1.1 MΩ || pF in Electrical Characteristics: OPA690IDBV, 5 VGo
- Changed the minimum most positive output voltage at no load from 3.8 V to 3.7 V in Electrical Characteristics: OPA690IDBV, 5 VGo
- Changed the typical most positive output voltage at no load from 4 V to 3.9 V in Electrical Characteristics: OPA690IDBV, 5 VGo
- Changed the typical most positive output voltage at 100 Ω load from 3.9 V to 3.85 V in Electrical Characteristics: OPA690IDBV, 5 VGo
- Changed the minimum most negative output voltage at no load from 1.2 V to 1.3 V in Electrical Characteristics: OPA690IDBV, 5 VGo
- Changed the typical most negative output voltage at no load from 1 V to 1.1 V and at and 100 Ω load from 1.1 V to 1.15 V in Electrical Characteristics: OPA690IDBV, 5 VGo
- Changed the typical current output sourcing from 160 mA to 190 mA in Electrical Characteristics: OPA690IDBV, 5 VGo
- Changed the typical current output sinking from –160 mA to –190 mA in Electrical Characteristics: OPA690IDBV, 5 VGo
- Changed the typical closed-loop output impedance from 0.04 Ω to 0.01 Ω in Electrical Characteristics: OPA690IDBV, 5 VGo
- Changed the typical power-down supply current from –100 μA to 75 μA in Electrical Characteristics: OPA690IDBV, 5 VGo
- Changed the typical off isolation from 65 dB to 72 dB in Electrical Characteristics: OPA690IDBV, 5 VGo
- Changed the typical output capacitance in disable from 4 pF to 8 pF in Electrical Characteristics: OPA690IDBV, 5 VGo
- Deleted the turn-on and turnoff glitch specifications from Electrical Characteristics sectionGo
- Changed the typical disable voltage from 1.8 V to 2.4 V in Electrical Characteristics: OPA690IDBV, 5 VGo
- Changed the typical disable pin input bias current from 75 μA to 60 μA in Electrical Characteristics: OPA690IDBV, 5 VGo
- Changed the typical quiescent current from 4.9 mA to 6.1 mA in Electrical Characteristics: OPA690IDBV, 5 VGo
- Changed the maximum quiescent current from 5.44 mA to 6.8 mA in Electrical Characteristics: OPA690IDBV, 5 VGo
- Changed the maximum quiescent current over temperature from 6.02 mA to 6.9 mA in Electrical Characteristics: OPA690IDBV, 5 VGo
- Changed the power-supply rejection ratio from 72 dB to 85 dB in Electrical Characteristics: OPA690IDBV, 5 VGo
- Deleted Single-Supply ADC Interface from Typical
Applications
Go
Changes from Revision F (February 2010) to Revision G (August 2016)
- 添加了“ESD 等级”表、“特性说明”部分、“器件功能模式”、“应用和实现”部分、“电源建议”部分、“布局”部分、“器件和文档支持”部分以及“机械、封装和可订购信息”部分Go
- Deleted Ordering Information table; see POA at the end of the
data sheetGo
Changes from Revision E (November 2008) to Revision F (February 2010)
- 根据当前标准更改了数据表格式Go
- Added Figure 6-61, Noninverting Overdrive Recovery plotGo
Changes from Revision D (August 2008) to Revision E (November 2008)
- Deleted obsolete OPA680 from Related Products
tableGo