米6体育平台手机版

ZHCSJK2O October 2004 – September 2023 PCA9306

PRODUCTION DATA

封装选项

机械数据 (封装 | 引脚)

DQE|8
- MPSS008B
DCU|8
- MPDS050E
DCT|8
- MPDS049D
YZT|8
- MXBG045G

散热焊盘机械数据 (封装 | 引脚)

订购信息

6.5 Electrical Characteristics

over recommended operating ambient temperature range (unless otherwise noted)

PARAMETER			TEST CONDITIONS			MIN	TYP⁽¹⁾	MAX	UNIT
V_IK	Input clamp voltage		I_I = –18 mA,	EN = 0 V		-1.2		0	V
I_IH	Input leakage current		V_I = 5 V,	EN = 0 V				5	μA
C_i_(EN)	Input capacitance		V_I = 3 V or 0				11		pF
C_io(off)	Off capacitance	SCLn, SDAn	V_O = 3 V or 0,	EN = 0 V			4	6	pF
C_io(on)	On capacitance	SCLn, SDAn	V_O = 3 V or 0,	EN = 3 V			10.5	12.5	pF
R_ON⁽²⁾	On-state resistance	SCLn, SDAn	V_I = 0	I_O = 64 mA	EN = 4.5 V		3.5	5.5	Ω
					EN = 3 V		4.7	7
					EN = 2.3 V		6.3	9.5
			V_I = 0	I_O = 15 mA	EN = 1.5 V		25.5	32
			V_I = 2.4 V⁽³⁾	I_O = 15 mA	EN = 4.5 V	1	6	15
			V_I = 2.4 V⁽³⁾	I_O = 15 mA	EN = 3 V	20	60	140
			V_I = 1.7 V⁽³⁾	I_O = 15 mA	EN = 2.3 V	20	60	140

(1) All typical values are at T_A = 25°C.

(2) Measured by the voltage drop between the SCL1 and SCL2, or SDA1 and SDA2 terminals, at the indicated current through the switch. Minimum ON-state resistance is determined by the lowest voltage of the two terminals.

(3) Measured in current sink configuration only (See Figure 7-1)