米6体育平台手机版

ZHCSNI9K August 2005 – March 2021 PCA9535

PRODUCTION DATA

封装选项

机械数据 (封装 | 引脚)

DGV|24
- MPDS006C
PW|24
- MPDS363A
DBQ|24
- MPDS211A
RGE|24
- MPQF124G
DW|24
- MPDS174A
DB|24
- MPDS509
RTW|24
- MPQF167C

散热焊盘机械数据 (封装 | 引脚)

RGE|24
- QFND008AA
RTW|24
- QFND062N

订购信息

6.5 Electrical Characteristics

over recommended operating free-air temperature range (unless otherwise noted)

PARAMETER		TEST CONDITIONS	V_CC	MIN	TYP⁽¹⁾	MAX	UNIT
V_IK	Input diode clamp voltage	I_I = –18 mA	2.3 V to 5.5 V	–1.2			V
V_PORR	Power-on reset voltage, V_CC rising	V_I = V_CC or GND, I_O = 0			1.2	1.65	V
V_PORF	Power-on reset voltage, V_CC falling	V_I = V_CC or GND, I_O = 0		0.75	1		V
V_OH	P-port high-level output voltage⁽²⁾	I_OH = –8 mA	2.3 V	1.8			V
			3 V	2.6
			4.75 V	4.1
		I_OH = –10 mA	2.3 V	1.7
			3 V	2.5
			4.75 V	4
I_OL	SDA	V_OL = 0.4 V	2.3 V to 5.5 V	3			mA
	P port⁽³⁾	V_OL = 0.5 V		8	20
	P port⁽³⁾	V_OL = 0.7 V		10	24
	INT	V_OL = 0.4 V		3
I_I	SCL, SDA	V_I = V_CC or GND	2.3 V to 5.5 V			±1	μA
I_I	A2–A0	V_I = V_CC or GND	2.3 V to 5.5 V			±1	μA
I_IH	P port	V_I = V_CC	2.3 V to 5.5 V			1	μA
I_IL	P port	V_I = GND	2.3 V to 5.5 V			–1	μA
I_CC	Operating mode	V_I = V_CC or GND, I_O = 0, I/O = inputs, f_SCL = 400 kHz	5.5 V		100	200	μA
			3.6 V		30	75
			2.7 V		20	50
	Standby mode	V_I = GND, I_O = 0, I/O = inputs, f_SCL = 0 kHz	5.5 V		1.5	8.7
			3.6 V		0.9	4
			2.7 V		0.6	3
ΔI_CC	Additional current in standby mode	One input at V_CC – 0.6 V, Other inputs at V_CC or GND	2.3 V to 5.5 V			200	μA
C_I	SCL	V_I = V_CC or GND	2.3 V to 5.5 V		3	8	pF
C_io	SDA	V_IO = V_CC or GND	2.3 V to 5.5 V		3	9.5	pF
C_io	P port	V_IO = V_CC or GND	2.3 V to 5.5 V		3.7	9.5	pF

(1) All typical values are at nominal supply voltage (2.5-V, 3.3-V, or 5-V V_CC) and T_A = 25°C.

(2) Each I/O must be limited externally to a maximum of 25 mA, and each octal (P07–P00 and P17–P10) must be limited to a maximum current of 100 mA, for a device total of 200 mA.

(3) The total current sourced by all I/Os must be limited to 160 mA (80 mA for P07–P00 and 80 mA for P17–P10).