over operating free-air temperature range (unless otherwise noted) See (1)
|
MIN |
MAX |
UNIT |
| VCC |
Supply voltage |
–0.5 |
6 |
V |
| VI |
Input voltage (2) |
–0.5 |
6 |
V |
| VO |
Output voltage (2) |
–0.5 |
6 |
V |
| IIK |
Input clamp
current |
VI
< 0 |
|
–20 |
mA |
| IOK |
Output clamp
current |
VO
< 0 |
|
–20 |
mA |
| IIOK |
Input/output
clamp current |
VO
< 0 or VO > VCC |
|
±20 |
mA |
| IOL |
Continuous
output low current |
VO
= 0 to VCC |
|
50 |
mA |
| IOH |
Continuous
output high current |
VO
= 0 to VCC |
|
–50 |
mA |
| ICC |
Continuous current through GND |
|
–200 |
mA |
| Continuous current through VCC |
|
160 |
| Tstg |
Storage temperature |
–65 |
150 |
°C |
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed.