A typical application of the PCA9543A will contain anywhere from 1 to 3 separate data pull-up voltages, V_DPUX , one for the master device (V_DPUM) and one for each of the selectable slave channels (V_DPU0 and V_DPU1). In the event where the master device and both slave devices operate at the same voltage, then the pass voltage, V_pass = V_DPUX. Once the maximum V_pass is known, V_cc can be selected using Figure 9-2. In an application where voltage translation is necessary, additional design requirements must be considered (See Design Requirements).

Figure 9-1 shows an application in which the PCA9543A can be used.

Figure 9-1 Typical Application